NV23 Build

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
odwyerjb
Frequent Poster
Frequent Poster
Posts: 12
Joined: Sat Mar 31, 2012 3:41 pm
Location: wilmington,nc 28409

NV23 Build

Post by odwyerjb »

Does anyone know the position of the stringers on the molds of the Novi 23. Or, where to cut the notches on the molds. I can't seem to find it on the plans.

jacquesmm
Site Admin
Site Admin
Posts: 28215
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: NV23 Build

Post by jacquesmm »

It's on the plans.

See drawing E239/5.
It shows the spacing of the stringers on frame B.
It is the same for all frames.
Jacques Mertens - Designer
http://boatbuildercentral.com

User avatar
Hope2float
* Bateau Builder *
* Bateau Builder *
Posts: 441
Joined: Mon Feb 18, 2008 4:12 pm
Location: Jackson NJ

Re: NV23 Build

Post by Hope2float »

Welcome Od
Topwater is building a NV23 he can probably help with some questions on that build. Good luck and enjoy the sanding :D
Dave

odwyerjb
Frequent Poster
Frequent Poster
Posts: 12
Joined: Sat Mar 31, 2012 3:41 pm
Location: wilmington,nc 28409

Re: NV23 Build

Post by odwyerjb »

Thanks very much. I found the numbers for frame B. This is a great forum!

User avatar
topwater
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3131
Joined: Tue Oct 30, 2007 6:27 pm
Location: Port Charlotte
Location: Florida

Re: NV23 Build

Post by topwater »

Dont forget to post pic's, at the rate i am moving at you will catch and pass me :!:
Novi 23 finally launched !

odwyerjb
Frequent Poster
Frequent Poster
Posts: 12
Joined: Sat Mar 31, 2012 3:41 pm
Location: wilmington,nc 28409

Re: NV23 Build

Post by odwyerjb »

Ok folks,
I am building and ready to share some pictures.
I understand I need to first put them in or on the gallery. but don't know how.

User avatar
Mad Dog
Very Active Poster
Very Active Poster
Posts: 1945
Joined: Sun Aug 05, 2007 1:49 pm
Location: San Antonio, Texas

Re: NV23 Build

Post by Mad Dog »

odwyerjb wrote:Ok folks,
I am building and ready to share some pictures.
I understand I need to first put them in or on the gallery. but don't know how.

You can also use a host like Photobucket to link in the pics. That was easier for me and allowed me to share images on other forums and such.

MD
Ergo piscor, ergo sum

odwyerjb
Frequent Poster
Frequent Poster
Posts: 12
Joined: Sat Mar 31, 2012 3:41 pm
Location: wilmington,nc 28409

Re: NV23 Build

Post by odwyerjb »

Thanks Mad Dog. Lets see if I can get this thread going and do something useful.
First picture:
Image

This is how It started on April 2nd 2012. I needed a place to build and didn't have a shop big enough. So I have to build outdoors. This is my back yard with my shed to the right. The trees to the left are just about 16 feet from the shed so there should be just enough room for the flip. You can see the sprinkler head whidh I moved so it wouldn't spray the boat each day.
This is the strongback made from 2 x 10's and on 4 inch posts.
Image
The yard has a bit of a grade, which you can see here in this picture.

Image

The strongback is 3 ft wide. I have seen this question asked in some other threads.
I have more pics posted on an album., but it is time to work on the boat!

odwyerjb
Frequent Poster
Frequent Poster
Posts: 12
Joined: Sat Mar 31, 2012 3:41 pm
Location: wilmington,nc 28409

Re: NV23 Build

Post by odwyerjb »

Still having trouble posting some pictures from the gallery, so this is a test.
First station installed on the strongback
Image

odwyerjb
Frequent Poster
Frequent Poster
Posts: 12
Joined: Sat Mar 31, 2012 3:41 pm
Location: wilmington,nc 28409

Re: NV23 Build

Post by odwyerjb »

Ok, but the picture is small. Secondtest

Image

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 0 guests