Boat Builder Central

I was thinking you may be able to get in there with a folded up piece of paper by hand and not have to remove the switches. If you're going to remove the switches and use a palm sander, 600 would be perfect.

I was thinking you may be able to get in there with a folded up piece of paper by hand and not have to remove the switches. If you're going to remove the switches and use a palm sander, 600 would be perfect.

Looking great! I always check for new updates on your project. You could hit that panel with some 1200 grit sandpaper or something similar to knock down the gloss if it gets to you.

Looking great! I always check for new updates on your project. You could hit that panel with some 1200 grit sandpaper or something similar to knock down the gloss if it gets to you.

It looking great!! In my opinion, any locker with anchor line and chain is a wet locker. Knowing that, you can be better prepared for the realities of having a big mass of wet rope and metal bits cramped together in a tight closed area. The solutions I've used over the years are: 1) Make sure the an...

That looks really great! I've been following this build since the first post. If you end up prop shopping, take a look at mercury enertia props. I went through a lot of props on my last boat and the enertia was the fastest by a couple mph and held the bow almost as well as a 4 blade. It was easily t...

There's also something like this: http://www.attwoodmarine.com/store/prod ... mount-vent (the 90 degree option). It's not directional.

Let me tell, the boat looks double now. :D So, why not make it longer then? 2' hull extension ending in a flat transom. :) O.K, how do i extend the hull bottom :wink: I know you're kidding, but extend hull like this: http://www.classicmako.com/forum/topic.asp?TOPIC_ID=24608 And here's another formu...

Let me tell, the boat looks double now. :D So, why not make it longer then? 2' hull extension ending in a flat transom. :) O.K, how do i extend the hull bottom :wink: I know you're kidding, but extend hull like this: http://www.classicmako.com/forum/topic.asp?TOPIC_ID=24608 And here's another formu...

There have been 3 threads in recent months in the pictures section of thehulltruth.com posted by builders either making a plug and then a mold or just building boats from a mold. There are others as well. Look for "reinventing a cat", "tideline", "freeman", and "ca...