Search found 50 matches
- Thu Feb 09, 2012 2:42 pm
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Re: Greek CV 16 Construction Pictures
Thanks for the input guys. Karl thanks for the tie down tip with the bungee cords to help with the kick up. :lol: I realize that by keeping the original dimensions of the CB it would perform as per design BUT I truly believe that if it was a little longer it would be a little better. Originally its ...
- Thu Feb 09, 2012 12:38 pm
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Re: Greek CV 16 Construction Pictures
This is the original dimensions of the CB
We want to lengthen it for better stability, Is this going to be OK
What would be the best dimensions?
We want to lengthen it for better stability, Is this going to be OK
What would be the best dimensions?
- Thu Feb 09, 2012 11:19 am
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Center Board to Dagger Board Modification
Center Board to Dagger Board Modification http://gallery.bateau2.com/albums/userpics/37454/normal_Dagger_Board_Mod.jpg After a lot of thought :doh: and research we have finally decided to go ahead and change (modify) the Center Board to a Dagger Board. We would like the forums input on the dimensio...
- Wed Jan 18, 2012 5:14 pm
- Forum: Power Boats
- Topic: OB 15
- Replies: 139
- Views: 21112
Re: OB 15
would like to know if anyone knows of any plans for a trailer for the OB 15? Have you see this http://www.boatdesigns.com/images/boattrailerpixdraw.jpg http://www.boatdesigns.com/Boat-Trailer-Plans/products/529/ I am really looking forward to following your OB 15 build. This will probably be my nex...
- Wed Jan 18, 2012 4:30 pm
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Re: Greek CV 16 Construction Pictures
Well the holidays are over and we are back to working on the boat. Happy New year everyone :D After wet sanding the primer with 400 grit I took ks8’s advice and rechecked the adhering specs and I re-sanded with 320 just to be safe. (thanks for catching that Karl) http://gallery.bateau2.com/albums/us...
- Sat Dec 24, 2011 1:21 pm
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Re: Greek CV 16 Construction Pictures
I used 400 grit because I am painting the hull Black, and as we all know Black is the worst color for imperfections.
A lot of work went into the finish so that I could eliminate any pin holes or orange peel that may appear. Two coats of polyethylene and then it’s time to turn her over.
A lot of work went into the finish so that I could eliminate any pin holes or orange peel that may appear. Two coats of polyethylene and then it’s time to turn her over.
- Fri Dec 23, 2011 6:07 am
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Re: Greek CV 16 Construction Pictures
This is the new trailer for the CV it has been modified by extending the neck about 1m. The reason that we have done this is because we have a shallow ramp. http://gallery.bateau2.com/albums/userpics/37454/normal_Photo1012.jpg Did I mention that we "Finished Sanding"... Finally :lol: (I ha...
- Fri Dec 23, 2011 6:02 am
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Greek CV 16 Construction Pictures
Sanding is finally finished It is my true belief that the only difference between Men and Boys is how you Finish :lol: (sanding that is) Our sanding sequence was 80 grit to start 120 main sanding 240 then 320 finishing 400 wet sanding (smother than a baby's bottom) Using a laser to lay out the wate...
- Fri Dec 23, 2011 5:46 am
- Forum: Sail Boats
- Topic: Greek CV 16 Construction Pictures
- Replies: 35
- Views: 7513
Re: Greek CV 16 Construction Pictures
Fitting the Keel Shoe After all the sanding finishing it was time to place the Keel Shoe. I had to help the plywood bend to the hull a little and then I applied a generous amount of epoxy and leveled everything out and we let it harden. http://gallery.bateau2.com/albums/userpics/37454/normal_Photo1...
- Thu Dec 22, 2011 4:04 pm
- Forum: Anything else and for sale. . .
- Topic: Merry Christmas and Happy Holidays
- Replies: 18
- Views: 1937
Re: Merry Christmas and Happy Holidays
I would also like to say Merry Christmas & Happy Holidays to the forum and wish all the best for the coming days to all fellow boat builders and to your families. I wish you all Health and Success and let's see what 2012 will bring. Hopefully not the end of the world as a few people have predict...