Search found 2152 matches
- Mon Apr 22, 2024 9:52 am
- Forum: Builder's Power Boats
- Topic: Cape Man's Dory
- Replies: 2994
- Views: 367018
Re: Cape Man's Dory
I thought he must be your brother, you look pretty similar! Nice trip you have going.
- Sat Apr 20, 2024 9:15 am
- Forum: Cracker Larry's Corner: Boat Repair and Rebuild Support
- Topic: 1988 Shoalwater 176 Rebuild
- Replies: 53
- Views: 7785
Re: 1988 Shoalwater 176 Rebuild
Drilling transom holes had me nervous as a cat too! Luckily holes are square and seem to be centered. The holes look round to me! LoL, I can't tell from the photo how you handled the holes in the transom, but be sure you seal up that plywood well. It's a pain to do, but drilling out the holes overs...
- Thu Apr 18, 2024 9:35 am
- Forum: Power Boats
- Topic: RB16 new build KY 1st timer
- Replies: 93
- Views: 2389
Re: RB16 new build KY 1st timer
On a planing hull you want sharp edges (not knife sharp, maybe 1/16 to 1/32" radius) where the hull meets the transom, and places like the step chine where the design wants the water to break free of the hull. A knife edge would work, but it would get damaged easily and paint won't stay on shar...
- Sat Apr 13, 2024 7:42 am
- Forum: Power Boats
- Topic: LB26
- Replies: 681
- Views: 74856
Re: LB26
Yes, that looks kind of good.
- Mon Apr 08, 2024 9:30 am
- Forum: Power Boats
- Topic: RB16 new build KY 1st timer
- Replies: 93
- Views: 2389
Re: RB16 new build KY 1st timer
Quickfair is good stuff, a bit pricey when you have to buy quantities of it. You can save some money by filling the low areas and also doing a first weave fill with epoxy/woodflour or silica. The watchword is neat- lay it down smoothly so you don't have to sand so much. Use a guidecoat to help ident...
- Fri Apr 05, 2024 9:44 am
- Forum: Power Boats
- Topic: OB15 - seams and chines, what tape? And daily screw-up
- Replies: 12
- Views: 285
Re: OB15 bow/chine
Buz, hopefully you'll get another response than mine, but I'll give it a go. There should not be a step at the bow, it should begin further back in my opinion. Rather than rely on someone's opinion, though, take a look at other builds, at the study plans, at your plans, surely that's shown somewhere...
- Fri Apr 05, 2024 9:29 am
- Forum: Builder's Power Boats
- Topic: OB15 in NC - Flounder Drum Trout
- Replies: 46
- Views: 1459
Re: OB15 in NC - Flounder Drum Trout
At one time during a discussion of solutions for droopy bow, Jacques posited that an additional mold ahead of the first might be a fix, but I don't know how one would go about figuring out the dimensions and placement of one.
- Fri Apr 05, 2024 9:15 am
- Forum: Power Boats
- Topic: LB26
- Replies: 681
- Views: 74856
Re: LB26
Good workmanship, really coming along nicely!
- Sat Mar 30, 2024 11:41 am
- Forum: Builder's Power Boats
- Topic: OB15 in NC - Flounder Drum Trout
- Replies: 46
- Views: 1459
Re: OB15 in NC - Flounder Drum Trout
I know that's not a good joint. When I filled it today in anger, I was intending to grind it smooth just before putting on wide cloth, figuring the other 36oz of tape and wide there would be enough to hold it together. I've realized since that grinding it off will release the tension on the outside...
- Fri Mar 29, 2024 12:52 pm
- Forum: Resins, Fiberglass and Paint
- Topic: The pink filler is...
- Replies: 11
- Views: 550
Re: The pink filler is...
A few people keep saying wood flour as an additive will absorb water, but once dry wood flour is been mixed into epoxy resin I disagree- as small as those particles are, they will absorb epoxy first, and once they're saturated that's it. It's ingrained in most of us to be sensitive to the relationsh...