Search found 204 matches

by dalnilo
Sat Sep 24, 2022 12:28 pm
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

Zipwake trim tabs wont help with a bow down boat. The only way you can get the bow up is do 1) reduce weight up front and 2) trim the OB out. Even if you use the Zipwakes to trim the boat in the transverse plane, they will tend to bring the bow down! Can the anchor windlass handle rope? I have an a...
by dalnilo
Sat Sep 24, 2022 3:06 am
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

Danilo, get rid of the water in the bow that is nearly 400lbs/176KG and is causing your drainage problems. With the CX you already have more weight forward than the C25 so by adding the extra water ballast you have made her bow heavy. Where did you get the idea to add the water ballast and so much ...
by dalnilo
Sat Sep 24, 2022 3:03 am
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

I exaggerated!!!! now I try to empty the water and leave only 10 meters of chain then all rope.
I will let you know if I can reduce the problem.
as far as scuppers are concerned, I hope to resolve having the slope towards the stern, if I can't I will try with ball scuppers.
by dalnilo
Fri Sep 23, 2022 3:00 am
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

At the bow I have 140 liters of water plus 100 kg between chain, anchor, windlass, 20 kg bow thruster.
if I reduce these weights do you think it can solve the problem?
could the ttop weight towards the bow?
what kind of scupper should i use? I used the same ones as peter's boat.
by dalnilo
Fri Sep 23, 2022 2:47 am
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

in reality the bow sinks about 8/10 cm with respect to the waterline.
this means that in the aft cockpit the water goes to the bow.
another problem, water enters the scuppers and being inclined towards the bow with the boat stationary it does not empty.
by dalnilo
Thu Sep 22, 2022 5:13 am
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

there are some problems, I should be able to solve them.
with your help
by dalnilo
Thu Sep 22, 2022 5:10 am
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

finally put in the water
tempImageZL3dvS.gif
by dalnilo
Wed Aug 10, 2022 1:39 pm
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

Capacity can be calculated according through a formula like the ABYC, US Coast Guard or EEC certification or using displacement figures, common sense and reports from builders. The DWL (Designed Water Line) is at 5000 lbs (2,200 liters). That puts the cockpit sole about 3" above the DWL. That ...
by dalnilo
Wed Aug 10, 2022 12:26 pm
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

I would like to know from the designer what capacity the boat has at full load?
by dalnilo
Wed Aug 10, 2022 12:22 pm
Forum: Power Boats
Topic: My cx 25
Replies: 371
Views: 47044

Re: My cx 25

guys here we are
IMG_2962.jpg
B024728E-2C79-4DC2-8A33-3EC0DCD1D957.jpg
B206106B-A362-4B57-858A-71DAFF094416.jpg