Boat Builder Central

Faqllguy1000 I guess time will tell

I do not know why pictures are rotated, there correct when clicked on

I disagree with with the statement about the frame members, after reading I did add another layer of 16 oz bi-directional glass at floor and topsides. the reason is this. if the frame member came through the floor from bottom then it would add good strength, the kit had small pieces taped to topside...

IMG_20230408_120634367_HDR.jpg IMG_20230410_170445606_HDR.jpg This is my second panga 22, my brother put a Yamaha 70 on it and it is great, about 30 mph top, I found a Yamaha 90 for less price than a 70, so that's what they are putting on it, it still is at the Yamaha dealership,it weighs 100 pound...

Thank you

Dealers near Chattanooga said it would be end of this year before they could get one, Tom, central Maine is a big company and sea trials is part of the price, they should pick out the right prop, I think I read your thread about props, they boat is staying in Florida, anyone have advice about gettin...

I will try again on pictures

The boat is now at central marine in Florida getting a Yamaha 70 put on it, hope to post some pictures of it in the water soon

I could not find pictures of the sapele deck construction, I did not have to steam it, started with the coaming, then the king plank at the bow to receive the ends of each strip,after cutting all the strips from 5/4 planks 9 ft long I cut scarf joints to glue up 24 ft strips,started with the strip r...

Yes , scuppers are 2 by 6 inch at transom with doors, you would not believe how comfortable these two seats are, still needs windshield and a leaning post/seat behind CC, will have same look as the other seats, ran out of paint on cockpit sole, to paint over soft sand,fine, takes 3 times the paint, ...

Thank you all