Search found 181 matches

by SP
Tue Dec 26, 2023 8:16 pm
Forum: Sail Boats
Topic: AD 14 mast partner location
Replies: 3
Views: 2874

Re: AD 14 mast partner location

Thank you for the help guys.
by SP
Thu Dec 14, 2023 2:26 pm
Forum: Sail Boats
Topic: AD 14 mast partner location
Replies: 3
Views: 2874

AD 14 mast partner location

I don’t see anywhere on the plans that shows the location of the mast partner on the cabin deck. I am assuming it is probably a dimension from frame A, and then you locate the mast step to get the required mast angle of 5 degrees. I’m looking, both metric and US plans…but don’t see it. There is a no...
by SP
Tue Sep 07, 2021 6:43 pm
Forum: Power Boats
Topic: DE23 motorwell bottom location- no dimensions
Replies: 0
Views: 1407

DE23 motorwell bottom location- no dimensions

DE23 I see the dimensions to cut out the motorwell bottom on D238/7, I also see where it is on the nesting drawing, D238/2, but I don't see any measurements where it is located in the motorwell. I see that it is installed at an angle, but there are no measurements how far down on the transom or fram...
by SP
Mon Jul 11, 2016 8:10 pm
Forum: Builder's Power Boats
Topic: knottyBuoyz III The TW28 Project
Replies: 2691
Views: 360368

Re: knottyBuoyz III The TW28 Project

I have a feeling the basic interior work/putting in bulkheads is going to go pretty quick.

Should be a big boost when you get a lot of new structure to look at.
by SP
Mon Jul 04, 2016 1:43 am
Forum: Builder's Sail Boats
Topic: New AD14 build
Replies: 227
Views: 81326

Re: New AD14 build

I use routers and pattern bits all the time on many different projects.

Routers are great tools.
by SP
Tue Jun 28, 2016 7:42 pm
Forum: Questions before purchasing the plans and announcements..
Topic: VG18 General Questions
Replies: 4
Views: 844

Re: VG18 General Questions

The vg18 has the updated wood composite keel that is integrated into the hull. No metal or welding like the original keel setup on the VG20. The VG20 also has an updated wood keel assembly, but it is separate, not integrated like on the VG18. You can say the VG18 has the second generation design. I ...
by SP
Fri Jun 24, 2016 3:39 am
Forum: Sail Boats
Topic: Plywood thickness
Replies: 1
Views: 1265

Plywood thickness

VG20 OK, I feel like I am starting to bug you Jacques,my apologies, but I can't quite figure it out and I need some guidance. Since I have to mail order all my plywood, I want to save money on shipping and only order once, so I need to have a complete take off and nesting done first, which is what I...
by SP
Mon Jun 20, 2016 11:29 pm
Forum: Sail Boats
Topic: Chainplates specifications
Replies: 1
Views: 1197

Chainplates specifications

VG20 chainplates

I am ordering 316 stainless steel flat bar for the chainplates on the VG20.

The 1 3/4" width as specified on the plans is an oddball size and not readily available that I have seen.

How critical is the width measurement?
by SP
Mon Jun 20, 2016 9:31 pm
Forum: Sail Boats
Topic: VG20 Bulkhead H
Replies: 1
Views: 1147

Re: VG20 Bulkhead H

Bumping this back up to the top.

When you get some time Jacques, can you let me know what the dimension is.

Thank you
by SP
Mon Jun 20, 2016 8:50 pm
Forum: Sail Boats
Topic: Keel center board pivot rod material
Replies: 4
Views: 1377

Re: Keel center board pivot rod material

Good. That tube is compressed when you tighen the bolt: the washers push on it. This is for the VG20, I don't see any washers or bolts, just a screw that goes into the end of the delrin pivot rod (which is cut with an X on the end so the screw pushes it out) that is inside the stainless steel pivot...