Search found 96 matches
- Thu Jul 27, 2017 12:15 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
The outhaul problem is really just because it was just tied to the end of the boom for mow. I need a proper pulley and cleat. And the fact that the sail I have threaded through the mast groove using the rope on the sail, so I can't drop it easily. So, coming into the dock trying to reduce sail to pr...
- Thu Jul 27, 2017 10:50 am
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
SPLASH! It has been a busy summer so it took me a lot longer than I expected to find a free day during the week when I could get the boat in the water for the first time. I wanted to do it on a weekday so the boat ramp wouldn't be crowded since I wasn't sure how well this would go. After many unfors...
- Fri Jun 30, 2017 11:21 am
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
I haven't done much in a few weeks due to kids' activities, but I am now ready to put the boat in the water (as soon as I get a free day). My daughter painted on the name:
- Mon May 15, 2017 7:19 am
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
Yes, the centerboard is in the trunk. It has been for a while actually. I have also installed all the rest of the ballast weights. I needed to know how the boat would sit on the trailer with everything in.
- Sun May 14, 2017 8:23 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
The last 2 weekends have been about the boat trailer. I ordered the kit from Harbor Freight tools and it has worked out OK. The kit is pretty good quality and went together well. http://gallery.bateau2.com/albums/userpics/89357/IMG_1830.JPG Unfortunately the bunks and rollers won't work with the kee...
- Mon May 01, 2017 5:51 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
gonandkarl - Were you thinking of using the rubrail by Tessilmare like you mentioned (http://boatbuildercentral.com/proddetail.php?prod=TM_Rubrail) or the BP_1235_wht_roll you posted the info about? (http://boatbuildercentral.com/proddetail.php?prod=BP_1235_wht_roll) I don't see exactly how to insta...
- Sun Apr 30, 2017 4:49 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
Correct. I added all the internal structural elements. The rubber will work well for minor bumps. I also wasn't sure about bending a laminated strip to match the 3 dimensional curve of the hull/deck joint.
- Sun Apr 30, 2017 12:29 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
I was planning to run the rubber strip along the entire length of the boat including the curved section along the deck/hull seam. I did not think of the strength aspect of the rubrail. How important is that?
- Sat Apr 29, 2017 7:34 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
Another thing I am working on is the rub rail and trim. I am experimenting with using 1/8 inch think 4 inch wide rubber strip to wrap over the curved edge. This serves two purposes - to guard the corner to prevent dings and to cover up the spots where the finish is not as good since the fiberglass t...
- Sat Apr 29, 2017 7:29 pm
- Forum: Builder's Sail Boats
- Topic: New AD14 build
- Replies: 227
- Views: 81551
Re: New AD14 build
I got my sail! It isn't exactly the what is in the plans but it is a simple (inexpensive) start. I had to remove the slugs since they didn't fit the mast track but the bolt rope fits. I need to add a good bit of rigging but I will just do some simple things to try it out and figure out what I really...