Search found 3506 matches
- Wed May 15, 2024 8:32 am
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2623
- Views: 306536
Re: Woods Skoota 32DM
Good luck, but with your skills you shouldn't need to much.
- Sun Apr 21, 2024 10:11 am
- Forum: Builder's Power Boats
- Topic: knottyBuoyz III The TW28 Project
- Replies: 2724
- Views: 377637
Re: knottyBuoyz III The TW28 Project
Most of the time it is easier for us to get in a mess than to get out of one.
- Sun Apr 21, 2024 10:05 am
- Forum: Builders' Tips, Tools, and Tricks of the trade
- Topic: Curved fairing board?
- Replies: 2
- Views: 470
Re: Curved fairing board?
It would be handy for sanding curved and rounded surfaces.
- Sun Apr 14, 2024 10:48 am
- Forum: Questions before purchasing the plans and announcements..
- Topic: Using molds for frames?
- Replies: 9
- Views: 613
Re: Using molds for frames?
A lot of builders will add a board, or two, three or more depending on size, to hold the sides to the correct beam after the molds are removed. This is after the flip. Then you can measure and cut out the frames knowing that the beam is correct. Once the frames are tacked, the boards can be removed ...
- Wed Apr 03, 2024 4:00 am
- Forum: Forum Software & Site Bug Reports
- Topic: Security certificate
- Replies: 4
- Views: 278
Re: Security certificate
It keeps telling me the same thing.
- Sun Mar 10, 2024 7:16 pm
- Forum: Anything else and for sale. . .
- Topic: Vance jack plates for sale
- Replies: 3
- Views: 302
Re: Vance jack plates for sale
Can you post dimensions of them both?
- Thu Feb 22, 2024 7:28 pm
- Forum: Forum Software & Site Bug Reports
- Topic: Post server upgrade forum config changes.
- Replies: 7
- Views: 1809
Re: Post server upgrade forum config changes.
Just noticed everything seems to be working good on my end. I don't post much right now but it's nice when I do it goes through quickly.
Jaysen: Thanks for the hard work and putting up with the stress of getting everything in order. Well done.
Jaysen: Thanks for the hard work and putting up with the stress of getting everything in order. Well done.
- Thu Feb 22, 2024 7:22 pm
- Forum: Builder's Sail Boats
- Topic: VG23 New Build
- Replies: 330
- Views: 112155
Re: VG23 New Build
Everything is looking incredibly good. A good cordless collection is a must in boat building. Saves on the cords everywhere and easy to grab and go. BTW, I am a big fan of Ryobi. The 18V, 5-gallon canister wet/dry vac does the job of keeping boat debris under control. 4 amp battery lasts a good while.
- Thu Feb 22, 2024 7:11 pm
- Forum: Builder's Power Boats
- Topic: repairing gap in keel/hull
- Replies: 5
- Views: 341
Re: repairing gap in keel/hull
Take the bow screws out to get the panels closer and that will fill the gap more. Some gap is good when using epoxy. Could try tightening the gap starting away from the bow and work towards it. Tightening them up a little at a time, each one. And checking how it fits on the bow. If some areas make c...
- Mon Feb 19, 2024 5:06 am
- Forum: Builder's Power Boats
- Topic: GT27 Build (Wes K)
- Replies: 771
- Views: 105773
Re: GT27 Build (Wes K)
Looked like a lot of things were finished before the move, and the whole crew was helping to get her ready for it. I like that the windows came with screens and shades, very nice. Is the exterior done and just the interior left? Electrical, electronics, plumbing and so on too? Great job!