Boat Builder Central

Jaysen wrote: ↑Fri Mar 20, 2020 2:50 pm That's looking sharp. And straight. When you do get rum in it?

Almost every evening

Thank you Glossy The deck isn't really the problem, what went wrong is trimming the side panels when glued on, after I glued the side panels on I drilled a small hole trough it just at top of all the frames and drew a line between those points, should have checked that with a batten or something. In...

Gorilla tape 2 strips of aluminum and some epoxy filler, overfilled it a little, I think/ hope this took care of it , will see after sanding.

which plane has the wobble, top or side? I was thinking, if it is only one, can you use a damn on the non wobble then back fill followed by sanding? kind of like your stainless approach but without perm metal install. Side and unfortunately more then one but still could work, such unusual lines it ...

Shot some primer, I'm not happy with the chine line, from above it's fine from the side it's wobbly, I saw this before and was hoping it was kind of an optical illusion because of al the different colored spots and would disappear when solid in color, unfortunately this was wishful thinking and stup...

cape man wrote: ↑Thu Mar 12, 2020 9:27 pm You make me sick! Freaking awesome!

Strange shouldn't be possible because she got her shot.

Rickk wrote: ↑Thu Mar 12, 2020 6:31 pm I might have missed the reason but why did you not grind/sand the black out of the center line and the chines?

It's a fairing compound those lines will receive paint

Thank you guys Second sanding epoxy round 120 grid, also had to fill a little air bubble due to a knot in the wood, almost there I think 8) http://gallery.bateau2.com/albums/userpics/19389/20200312_115606.jpg http://gallery.bateau2.com/albums/userpics/19389/20200312_120318.jpg http://gallery.bateau2...

You're welcome, maybe you can get some hints from my bracket album also? so here it is,
http://gallery.bateau2.com/thumbnails.p ... 571&page=1

Hi I got a PM from Terry (don't know his forum name) in my email about my engine bracket, for some reason I can't reply on it through the user control panel, that's why I'm doing it here, Terry this is all the drawings I have from the bracket with this you should be able to weld one. Profile drawing...