Search found 320 matches
- Mon Dec 27, 2021 6:40 pm
- Forum: Builder's Small Boats
- Topic: Jaysen's V12 -- 'Lil Bit' of everything fun
- Replies: 1742
- Views: 536813
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
If you check out tips from a shipwright on youtube, he fairs a hull with the plane. also, his tips for tuning a plane up are top notch. The problem for most with the power plane is that it makes things flat. Perfect for removing glue from beam laminations. Less ideal for boat hulls. Hence my scratch...
- Sun Dec 26, 2021 7:59 pm
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2620
- Views: 295814
Re: Woods Skoota 32DM
I mean its hard with pictures obviously. I test people all the time on noticing details and I promise you are just about the only person that will notice it. If it bothers you in a year then change it. Otherwise the doors will cover it and you’ll never notice. Hell you might decide after using it fo...
- Sun Dec 26, 2021 2:07 pm
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2620
- Views: 295814
Re: Woods Skoota 32DM
I’m not talking about the hole the pocket hole drill makes when i say pilot hole. Plastic requires all the material where the screw shaft goes through to be removed, unlike wood. Wood has space inside it where it can compress the extra material. plastic is 100% full so it expands outward when you pu...
- Sat Dec 25, 2021 3:15 pm
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2620
- Views: 295814
Re: Woods Skoota 32DM
Good looking pocket screw joinery is harder than people make it sound. you need a clamp to pull the pieces together, kreg makes one. Right Angle Clamp 5-in Right Angle Clamp Handscrew Clamp https://www.lowes.com/pd/Kreg-Right-Angle-Clamp-6-in-Right-Angle-Clamp-Handscrew-Clamp/1000105661 this might n...
- Sat Dec 25, 2021 11:49 am
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2620
- Views: 295814
Re: Woods Skoota 32DM
yep, they make them that long. that displacement is from not using the correct size predrill bit, also it needs to be very well centered. its not pushing one way or another. Also, backing the screw out and putting it back in. too much pressure can be part of the problem. plastic should have less pre...
- Sat Dec 25, 2021 10:54 am
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2620
- Views: 295814
Re: Woods Skoota 32DM
so I think the issue with movement is the plastic doesn’t have internal space like wood for the screw shaft. so you need to put a full pilot hole for the shaft of the screw. it doesn’t matter how much pressure its never going to work because the plastic needs to push the excess material somewhere. t...
- Fri Dec 24, 2021 10:13 am
- Forum: Power Boats
- Topic: Happy Holidays to all!!!!
- Replies: 4
- Views: 339
Re: Happy Holidays to all!!!!
Happy Holidays! Hope everyone is taking sometime off and getting recharged for the crazyness of 2022
- Fri Dec 24, 2021 10:12 am
- Forum: Power Boats
- Topic: Happy Holidays to all!!!!
- Replies: 4
- Views: 339
- Fri Dec 24, 2021 9:06 am
- Forum: Power Boats
- Topic: OD18 Outdoor Storage Florida
- Replies: 12
- Views: 852
Re: OD18 Outdoor Storage Florida
If you are thinking about leaving it basically unattended in florida except for vacations. you are going to need a hurricane resistant cover, strapping it to trailer. Staking the trailer to the ground, like how they do mobile homes.
- Fri Dec 24, 2021 7:48 am
- Forum: Builder's Power Boats
- Topic: Woods Skoota 32DM
- Replies: 2620
- Views: 295814
Re: Woods Skoota 32DM
It can be sanded, its just different than sanding wood. And you aren’t easily going to remove an 1/8” material that way. a low angle hand plane and flame polishing may help you get a high spot. if you get the surface smooth, you could do vinyl wrapping or something similar on the door if there is a ...