You could also keep a thick pair of rubber gloves onboard.fallguy1000 wrote: ↑Wed Oct 25, 2023 10:14 amI did not enjoy holding the wheel under the vessels hoghest point.
Search found 3501 matches
- Wed Oct 25, 2023 8:01 pm
- Forum: Anything else and for sale. . .
- Topic: My steel wheel
- Replies: 11
- Views: 5860
Re: My steel wheel
- Mon Oct 23, 2023 8:25 pm
- Forum: Anything else and for sale. . .
- Topic: Heat Shield ideas
- Replies: 17
- Views: 2189
Re: Heat Shield ideas
I am guessing you do not want to vent outside so buy a ductless, 12Volt RV hood vent. Easy to install and provides more lighting.
- Mon Oct 23, 2023 6:57 pm
- Forum: Anything else and for sale. . .
- Topic: Do you need a drain tube?
- Replies: 8
- Views: 3498
Re: Do you need a drain tube?
I used a garboard plug so no tube but threaded brass hole and used a hexagon plug that uses a Allen wrench. Limited access to bilge at the center of the transom.
- Fri Oct 20, 2023 6:55 am
- Forum: Power Boats
- Topic: GV15 Console -- need ideas
- Replies: 2
- Views: 798
Re: GV15 Console -- need ideas
Not knowing if you are going with a stationary tank or not, portable is the easiest to use without all the filler tube and vent restrictions. The bottom of the opening needs to be vented to the outside of the seat box and sealed on the back side that is also the front of the console. The fuel line g...
- Fri Oct 20, 2023 6:25 am
- Forum: Power Boats
- Topic: Spray Rail Ideas?
- Replies: 17
- Views: 2308
Re: Spray Rail Ideas?
Now that it is becoming winter here along the Texas gulf coast, (dipping into the 70s during the day already! brrrr) I need to start thinking of spray rails and a bigger wind screen.
- Fri Oct 20, 2023 6:12 am
- Forum: Anything else and for sale. . .
- Topic: Heat Shield ideas
- Replies: 17
- Views: 2189
Re: Heat Shield ideas
Hard to tell how far the stove sets under the cabinet but if you need a heat deflector, Jaysen's idea is the best bet. The idea is to not let the heat ever reach the surface of the cabinet. The air gap Jaysen is talking about, if deflector is angled correctly, will pull cool air into the gap per Ber...
- Fri Oct 20, 2023 5:20 am
- Forum: Builder's Power Boats
- Topic: Hardener sitting in heat all summer. Issues?
- Replies: 2
- Views: 995
Re: Hardener sitting in heat all summer. Issues?
My warehouse in the Houston heat would get over 110 degrees in the summer and other than the epoxy pouring closer like water, it always worked fine. But even slow hardener had working time of fast. I used weight and scales to measure the amounts due to the viscosity changing with temperature. A few ...
- Wed Oct 18, 2023 6:56 pm
- Forum: Builder's Power Boats
- Topic: knottyBuoyz III The TW28 Project
- Replies: 2691
- Views: 359963
Re: knottyBuoyz III The TW28 Project
I don't see the placement being a disappointment to the pair of you nor those that are following.
I am a shadow follower, one that reads and checks your post just don't post much on them. It is an exciting build to follow.
I am a shadow follower, one that reads and checks your post just don't post much on them. It is an exciting build to follow.
- Tue Oct 17, 2023 6:13 am
- Forum: Builder's Sail Boats
- Topic: VG23 New Build
- Replies: 322
- Views: 94911
Re: VG23 New Build
Everything seems to be coming along nicely.
Nice work!
Nice work!
- Wed Oct 11, 2023 5:03 pm
- Forum: Builders' Tips, Tools, and Tricks of the trade
- Topic: Fuel Lines
- Replies: 9
- Views: 2156
Re: Fuel Lines
Well that really blows.