Search found 1772 matches
- Thu Dec 23, 2021 10:53 pm
- Forum: Power Boats
- Topic: Sanity check!
- Replies: 5
- Views: 384
Re: Sanity check!
One place to be careful is when scarfing or butt joiinting the bottom panels or side panels: dont make 2 left sides! If scarfing not an issue but a butt block on the outside of the boat is going to get some looks.
- Thu Dec 23, 2021 8:48 am
- Forum: Builder's Power Boats
- Topic: FS 17 - Raised Sheer
- Replies: 432
- Views: 55811
Re: FS 17 - Raised Sheer
Great looking work Joe!
- Wed Dec 22, 2021 11:17 am
- Forum: Power Boats
- Topic: DE 25
- Replies: 31
- Views: 1868
Re: DE 25
Also, the volume of the hull is increased 33% (1.1^3) . So for the new larger boat to sit at the same waterline as designed the weight would need to be 33% more, not necessarily 10% more. Phil This is a mindbender. I like it! If you scaled up a photo of the boat that had an accurate waterline paint...
- Wed Dec 22, 2021 9:29 am
- Forum: Power Boats
- Topic: DE 25
- Replies: 31
- Views: 1868
Re: DE 25
Also, the volume of the hull is increased 33% (1.1^3) . So for the new larger boat to sit at the same waterline as designed the weight would need to be 33% more, not necessarily 10% more. Phil This is a mindbender. I like it! If you scaled up a photo of the boat that had an accurate waterline paint...
- Tue Dec 21, 2021 5:21 pm
- Forum: Builder's Power Boats
- Topic: Trent's FS14 LS Build
- Replies: 206
- Views: 26925
Re: Trent's FS14 LS Build
Crimony Trent, that is some crazy high-quality, professional looking work! Gold-plating not required! I can now attest to the fact that trying to keep the boat clean in places where the paint is not fair and very smooth is about impossible, so you're really going to appreciate that effort, will pay ...
- Sun Dec 19, 2021 9:07 pm
- Forum: Builder's Power Boats
- Topic: Cameron's FS14LS+5%
- Replies: 522
- Views: 44163
Re: Cameron's FS14LS+5%
Really impressive Cameron, you are super organized! Mask job and non skid look pro. Bolting stuff on is the instant gratification portion, enjoy!
- Sat Dec 18, 2021 2:33 pm
- Forum: Builder's Power Boats
- Topic: FS18 on Cape Cod!
- Replies: 81
- Views: 6653
Re: FS18 on Cape Cod!
I've been pleasantly surprised by the oyster white I used by total boat. I originally thought it was too beige but now I love it, if you're looking for off-white suggestions.
I'll also say that once I got it figured out, the grit that bbc sells makes great non skid.
I'll also say that once I got it figured out, the grit that bbc sells makes great non skid.
- Fri Dec 17, 2021 5:47 pm
- Forum: Builder's Power Boats
- Topic: C19 in Richmond, VA
- Replies: 634
- Views: 226945
- Fri Dec 17, 2021 3:09 pm
- Forum: Builder's Power Boats
- Topic: C19 in Richmond, VA
- Replies: 634
- Views: 226945
Re: C19 in Richmond, VA
Sandbags in the bow.Dan_Smullen wrote: ↑Fri Dec 17, 2021 1:33 pm There is no feasible correction after the build is done.
- Fri Dec 17, 2021 3:06 pm
- Forum: Builder's Power Boats
- Topic: FS18 on Cape Cod!
- Replies: 81
- Views: 6653
Re: FS18 on Cape Cod!
Ba............BOOM!
Congrats, that is SWEET!
Congrats, that is SWEET!