Search found 36 matches
- Sun May 10, 2020 11:57 pm
- Forum: Builder's Small Boats
- Topic: GV11 build Seattle
- Replies: 10
- Views: 1886
Re: GV11 build Seattle
And some things that sort of look like boat parts:
I used a jigsaw to make the cuts, so they ended up a little wavy on the longer straight lines. Next time I'll get my act together and dig out the circle saw.- Sun May 10, 2020 11:55 pm
- Forum: Builder's Small Boats
- Topic: GV11 build Seattle
- Replies: 10
- Views: 1886
Re: GV11 build Seattle
Here is the "workshop"
- Sat May 09, 2020 10:02 am
- Forum: Builder's Small Boats
- Topic: GV11 build Seattle
- Replies: 10
- Views: 1886
Re: GV11 build Seattle
Mattkab, I’m right smack in the middle of Seattle in the Central District. I would have thought there weren’t many boats getting built in my neighborhood, but there are actually two other boat within a block of here that appear to be home built. We’re one of the lucky blocks in this part of town whe...
- Sat May 09, 2020 12:09 am
- Forum: Builder's Small Boats
- Topic: GV11 build Seattle
- Replies: 10
- Views: 1886
GV11 build Seattle
And so it begins...GV11 quarantine project is officially underway. Got the first sheet of plywood marked up and ready to cut tomorrow. Was going to post a “workshop” photo, but ran out of light. Although fortunately my workshop isn’t very photo worthy. In fact, it looks a lot like a driveway with th...
- Wed May 06, 2020 11:58 pm
- Forum: Small Boats
- Topic: GV 11 materials question
- Replies: 32
- Views: 4251
Re: GV 11 materials question
Thanks, Evan. For the bottom, do you mean just the bottom panels and plus a couple inches over the joint with the side panels? I was thinking of an 8 HP engine or something relatively modest. Is the 12 oz biaxial on both sides necessary even if I've got a relatively small, albeit planing, engine? Ha...
- Wed May 06, 2020 2:55 pm
- Forum: Small Boats
- Topic: GV 11 materials question
- Replies: 32
- Views: 4251
Re: GV 11 materials question
Thanks for the input. I was thinking of using 12 oz on the bottom panels and 6 oz on the sides. I think my glassing skills are somewhere between poor and very poor. I've only ever done smaller repairs on other boats before, so I'll be on the uphill side of the learning curve. Using some really rough...
- Wed May 06, 2020 2:00 pm
- Forum: Small Boats
- Topic: GV 11 materials question
- Replies: 32
- Views: 4251
GV 11 materials question
Hello all, I joined this site a few years ago with the intention of building something big but then life interfered and I disappeared after having a kid, moving houses, etc. Finally getting back to it and just purchased plans for a GV 11. Eventually I'd like to build something in the 16-17 foot rang...
- Sun Jul 10, 2016 12:23 pm
- Forum: Questions before purchasing the plans and announcements..
- Topic: Problems with the DE 23?
- Replies: 12
- Views: 2018
Re: Problems with the DE 23?
Once I get a little more serious, I'd love to take a look if you don't mind! Is it the blue hull with the white cabin? It looks like one of those photos is at Twin Bridges up near LaConner (or maybe just a marina with a similar layout), where we used to keep our boat. What size engine do you have on...
- Thu Jul 07, 2016 12:03 am
- Forum: Questions before purchasing the plans and announcements..
- Topic: Problems with the DE 23?
- Replies: 12
- Views: 2018
Re: Problems with the DE 23?
Amydog, I don't think I've seen yours on here--any chance you've got some pictures or a build thread?
- Tue Jul 05, 2016 10:30 am
- Forum: Questions before purchasing the plans and announcements..
- Topic: Problems with the DE 23?
- Replies: 12
- Views: 2018
Re: Problems with the DE 23?
The DE 23 looks like the perfect boat for me but I am not very familiar with that hull type as I don't see many of that style out here so I would love to hear more about any problems there are with that type. Why assume that there could be a problem? There are different types of boats with differen...