Boat Builder Central

Fuzz wrote: ↑Tue Mar 19, 2024 2:02 pm Just a heads up the links do not work for me.

Yeah… the signature links point to the old sites. They need to be updated to the new one. Not sure I can fix that safely. We shall see.

That should be coppermine based on links to images. I’m not seeing anything. Try another upload. I’ve enabled logging again.

Can you tell me which gallery? I'm not having issues with either right not (3:46pET/GMT-4)

That extra height might be welcome in rough seas to secure “bodies” in the cockpit. As far as water removal, that should be a set of large, through transom scuppers. In a number of small offshore designs the transom resembles Swiss cheese to ensure water vacates quickly. That would be my approach to...

Those gps are a bit much, but yes, they can. It will just add “bad weight” and a lot of fairing work. It’s worth the effort to fiddle with the alignment a bit more. If you want to leave the gap, do yourself a favor and cut some plywood to fill the majority of that gap. Just to fill it up and reduce ...

You’re welcome. Hopefully things will keep humming along.

2 amps for an iPhone less the loss of the 12v to 5v converter. Best way though is to hookup your charging system, including a discharged phone, then measure the draw. Then calculate how long you can draw that time the battery before reaching the shutoff voltage for the charger (nominal for most is a...

These are "tuna tubes" that are used for live baits that need more water than live wells can provide. Most of the guys here need them for smaller fish than the big manufactures build the stock systems to support. See a need, fill a need. That bonita was way bigger than the tube was intende...

Here are some photos of what I’m making… IMG_2185.jpeg IMG_2164.jpeg IMG_2161.jpeg IMG_2153.jpeg IMG_2150.jpeg IMG_2148.jpeg IMG_2140.jpeg If you want to see the tube with a Bonita in it, we put one in a bucket, sent off shore, and gave it a try…. https://facebook.com/that.guy.reels.and.stuff

Nice! The e3s1p is doing well for me with PLA. I’ll paint some pics of “the project” that’s paying for this habit. I’ve been too busy to get back to ABS but I did manage a few calibration cubes in it. The current hang up is 1.0mm nozzle setup. It will make sense when you we the pics/vid of what I’m ...