Its the fiberglass tray that holds engine instruments.
It will hold radio when I’m done. This one met its maker. Stupid 5200 doing 5200 things instead of giving up.
Jaysen's Helms 24
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's Helms 24
Re: Jaysen's Helms 24
Engine control panel.
There are only two seasons in Vermont: boating season, and boat-building season.
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's Helms 24
Nothing shows up but touch screens. You have a site that I can reference?
I just need the fiberglass shell. I’m not putting gauges back on there.
I just need the fiberglass shell. I’m not putting gauges back on there.
Re: Jaysen's Helms 24
https://discountmarinesource.com/store/ ... gKkoPD_BwE
Thats an example.
If you are not replacing the gauges then you can use a flat piece of plywood, sealed.
There are only two seasons in Vermont: boating season, and boat-building season.
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's Helms 24
Plan is radio and some switches (nav, anchor, etc). Was hoping to get the set back tub type thing but no cuts. Everything I’m finding assumes gauges.
-
- * Bateau Builder - Expert *
- Posts: 10203
- Joined: Tue Jan 12, 2010 12:25 am
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's Helms 24
Starting to look that way. Likely to end up a simple sheet of flat stock covering the hole with nothing in it. Not ideal to have things sticking into an area that tends to collect tails of working lines.
Re: Jaysen's Helms 24
Here's another boat owner looking for the same thing, with some suggestions:
https://forums.sailboatowners.com/threa ... ks.194655/
https://forums.sailboatowners.com/threa ... ks.194655/
Hank
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's Helms 24
Th a is peewee. That’s close.
Who is online
Users browsing this forum: No registered users and 13 guests