Jaysen's Helms 24

[Jaysen]

Its the fiberglass tray that holds engine instruments.

It will hold radio when I’m done. This one met its maker. Stupid 5200 doing 5200 things instead of giving up.

[VT_Jeff]

Engine control panel.

[Jaysen]

Nothing shows up but touch screens. You have a site that I can reference?

I just need the fiberglass shell. I’m not putting gauges back on there.

[VT_Jeff]

Nothing shows up but touch screens. You have a site that I can reference?

I just need the fiberglass shell. I’m not putting gauges back on there.

https://discountmarinesource.com/store/ ... gKkoPD_BwE

Thats an example.

If you are not replacing the gauges then you can use a flat piece of plywood, sealed.

[Jaysen]

Plan is radio and some switches (nav, anchor, etc). Was hoping to get the set back tub type thing but no cuts. Everything I’m finding assumes gauges.

[fallguy1000]

diy

[Jaysen]

Starting to look that way. Likely to end up a simple sheet of flat stock covering the hole with nothing in it. Not ideal to have things sticking into an area that tends to collect tails of working lines.

[pee wee]

Here's another boat owner looking for the same thing, with some suggestions:

https://forums.sailboatowners.com/threa ... ks.194655/

[pee wee]

Perhaps more to your needs:

https://moyermarine.com/product/control ... ug_16_556/

[Jaysen]

Th a is peewee. That’s close.