Page 1 of 9
Gubbs GT23
Posted: Wed Oct 18, 2006 11:19 am
by Gubbs
Re: Gubbs GT23
Posted: Wed Oct 18, 2006 11:45 am
by Knottybuoyz
What do ya think, am I half way there yet???
Just when ya think you're half way, you're actually half way to half way!
Good luck and keep building. Looking good so far!
RIck
Posted: Wed Oct 18, 2006 12:17 pm
by tech_support
fall, watch out for falling trees
Posted: Wed Oct 18, 2006 3:58 pm
by mecreature
That boat looks hugh at that angle...
Looks great..
Posted: Wed Oct 18, 2006 7:28 pm
by nort
That is definately the big garvey some folks have asked for. All you have to do is leave off all of that cabin stuff.
Posted: Thu Oct 19, 2006 8:43 am
by Gubbs
Thanks for the comments, guys. And yes, Joel, I do cringe when the winds whip up!
cheers
Posted: Thu Oct 19, 2006 1:17 pm
by ks8
Halfway? All depends on your plans for the interior... but you've got the *make it float* part much more than halfway!
Posted: Tue Oct 24, 2006 4:27 pm
by OzzyC
Dude, you passed us up. Now we get to start asking you for advice.
Posted: Tue Apr 03, 2007 8:28 am
by Gubbs
Winter is finally over here and it is time for an update! Last Fall, before the snow came, I managed to cover the inside of the boat with 12oz glass. Over the winter, I made bunks and benches in my basement, and they are ready to be installed later this summer. Last weekend it was warm enough to work in the boat, so I began installing the stringers. This weekend I will continue with the stringers and install the forward bulkhead.
cheers
Bill
Posted: Tue Apr 03, 2007 12:27 pm
by OzzyC
You took the winter off... we didn't... and you're still pulling farther and farther ahead of us.
