PH18 started

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
Deedaddy
Active Poster
Active Poster
Posts: 414
Joined: Sat Oct 02, 2004 12:51 pm
Location: Wilmington, NC

Post by Deedaddy »

Muddler wrote:I am at the stage of installing the chase tubes and had several questions.

On the starboard side of your boat you appear to have three tubes running to the stern.
1. One tube is 3" for the shift cables?, is it located between the inside and out side stringers?
2. Where does it stop, between at the stern and the last bulkhead?
3. One tube is 2" inch, is this for the hydraulic steering?
4. Is that a 1" tube from the gas tank area to the stern for the fuel line or is it 1.5"?

You and the family have done a superb job. I can only hope mine looks this good.

Thanks in advance.

Muddler
1, 2, and 3 are yes. 4, is also 2" and is for the fuel line to the bow under casting deck.

dborecky
* Bateau Builder *
* Bateau Builder *
Posts: 732
Joined: Mon Mar 27, 2006 10:45 am
Location: Tarpon Springs, Florida

Post by dborecky »

I'm sure you have that motor broat in by now..... :lol: What are the numbers with the engine set up you have set up? RPM Vs Speed including WOT? :doh: Just curious to see how she is running...

Derrick

Tagged
Frequent Poster
Frequent Poster
Posts: 90
Joined: Mon Apr 30, 2007 5:42 pm
Location: Victoria, Tx.

Post by Tagged »

Ditto what he said. Beautiful boat. howz it running?


Tag

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests