Note that the wood is exterior AC, I am going the route of potentially disposable stations. Will deide if this is good as work progresses. Here is the middle station again. Note the use of scrap wood. Not pretty, but it works.
NV23 Build
Re: NV23 Build
Gluing up the ransom. First use of Meranti on the boat. Nice stuff. pretty where the resin shows the grain. Too bad it will be painted.
Here is the glueup of the outside stringers. The clamps are scraps screwed to the shops wooden floor.
Here is the glueup of the outside stringers. The clamps are scraps screwed to the shops wooden floor.
Re: NV23 Build
Here is another pic of the outside stringers, and a very messy shop. The stringers are almost as long as the shop.
At this point I was dying to see some boat shape so started to do some assembly:
At this point I was dying to see some boat shape so started to do some assembly:
Re: NV23 Build
here is a pic of one of the center stringers. Wasn't happy with how the notches lined up so I recut them. Didn't get a picture of the glueup on these, but they extended past the shop floor.
-
- Very Active Poster
- Posts: 1110
- Joined: Fri Jan 30, 2009 12:10 pm
- Location: The Third Coast-CC Tx
Re: NV23 Build
Looks like my shop but cleaner. Nice work..build-on
Who is online
Users browsing this forum: No registered users and 18 guests