A Cracker Built GF18- Finished 6/28/15
- gk108
- * Bateau Builder - Expert *
- Posts: 3356
- Joined: Thu Jul 28, 2005 6:53 pm
- Location: The Peach State
Re: A Cracker Built GF18
Larry, we'll give you a pass on the boat work. Sometimes, you just have to take care of biz.
CC, D15, V10
- robbiro
- * Bateau Builder *
- Posts: 841
- Joined: Thu Mar 23, 2006 10:51 pm
- Location: Central Mississippi, USA
Re: A Cracker Built GF18
And Mamma always comes first. Thoughts and prayers for continued improvement from us.
Robbie
Robbie
32.20.0983N
89.48.0787W
GF-16 FIRST LIGHT finished; D-5 Crusader '08 finished, PY 12 plans in hand
89.48.0787W
GF-16 FIRST LIGHT finished; D-5 Crusader '08 finished, PY 12 plans in hand
-
- Very Active Poster
- Posts: 770
- Joined: Thu Jun 29, 2006 4:54 pm
- Location: Indiana
Re: A Cracker Built GF18
I stopped in for a quick peek and couldn't drag myself away from your GF18 thread.
I sure do enjoy reading about your builds. Best wishes sent.
I sure do enjoy reading about your builds. Best wishes sent.
- flattitude 1976
- Frequent Poster
- Posts: 21
- Joined: Mon Jan 26, 2009 2:23 am
- Location: Loxahatchee, Fl
Re: A Cracker Built GF18
Prayers to you and your family Larry. May she make a speedy and full recovery. Make sure she is using her inspirometer every hour if she can. It is very important and speeds the healing process.
Re: A Cracker Built GF18
That’s a good thing Larry, very fortunate.we've got a tight family network that hangs together when needed
I hope you Mom’s doing better, Janet said to tell you she will say a prayer, her Mom just got out of the hospital a couple months ago with pneumonia, she’s 91 and doing great now, between the Hospital and family support she will come out of this just fine.
Joe & Janet
Completed: OD16, P19, FS14, V12 in progress
- Cracker Larry
- * Bateau Builder - Expert *
- Posts: 22491
- Joined: Fri Mar 11, 2005 3:39 pm
- Location: Savannah, GA
Re: A Cracker Built GF18
Thanks all for the thoughts, prayers and well wishes. We sure appreciate it. Still making steady improvement, the docs say they are going to move her out of PCU and into a regular room later today.
I did the night shift, got the day off so planning to do some boat work today
I did the night shift, got the day off so planning to do some boat work today
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose
-
- * Bateau Builder *
- Posts: 1557
- Joined: Mon Nov 07, 2011 8:51 am
- Location: Ingleside, TX
- Location: Texas Coastal Bend
Re: A Cracker Built GF18
Sometimes boat work is the best thing to clear your mind and escape from the world around us.
Mike
"Come, follow me and I will make you fishers of men."
Matthew 4:19
"Come, follow me and I will make you fishers of men."
Matthew 4:19
- Cracker Larry
- * Bateau Builder - Expert *
- Posts: 22491
- Joined: Fri Mar 11, 2005 3:39 pm
- Location: Savannah, GA
Re: A Cracker Built GF18
Yep, work and fishing are good for the soul. Raining again though, didn't go fishing. Need to.
Masked off for gluing the rub rails, We don't want glue drips on our clean primer.
Dry fitted the first layer all around with screws, but the 3 1/2" wide rails took some clamp persuasion also. Got the first layer on the starboard side glued, screwed and clamped...
And the first layer on the port side fitted and screwed into position..
Then it started raining sideways again. We needed some more rain
Masked off for gluing the rub rails, We don't want glue drips on our clean primer.
Dry fitted the first layer all around with screws, but the 3 1/2" wide rails took some clamp persuasion also. Got the first layer on the starboard side glued, screwed and clamped...
And the first layer on the port side fitted and screwed into position..
Then it started raining sideways again. We needed some more rain
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose
-
- Very Active Poster
- Posts: 1110
- Joined: Fri Jan 30, 2009 12:10 pm
- Location: The Third Coast-CC Tx
Re: A Cracker Built GF18
Wish you could send some of that rain down this way. Always seem to be a day late, lately. Sorry to hear about your mom but also glad to see she is doing better. Prayers sent amigo.
Re: A Cracker Built GF18
Glad to see you're back at it.
What type of Nav lights will you be using?
Hope all is well.
Gary
What type of Nav lights will you be using?
Hope all is well.
Gary
Who is online
Users browsing this forum: Bing [Bot] and 14 guests