Are they making adult toys also? if so they might have misplaced your console mold LOL sorry couldn't help myselfWouter wrote: I got the console Tribal Bass Boats SA
Wouter's PH18 Namibia
- peter-curacao
- * Bateau Builder - Expert *
- Posts: 7607
- Joined: Mon Mar 24, 2008 1:29 pm
- Location: Curaçao Dutch Caribbean
Re: Wouter's PH18 Namibia
-
- Very Active Poster
- Posts: 1699
- Joined: Fri Sep 05, 2003 1:00 am
- Location: Central Wisconsin, USA
Re: Wouter's PH18 Namibia
Nicely done on the flip!
-
- * Bateau Builder - Expert *
- Posts: 882
- Joined: Mon Feb 04, 2013 9:06 am
- Location: Ottawa, ON, Canada
Re: Wouter's PH18 Namibia
Nice hull Wouter and your glass work as well ! The flip is one huge relief.
Marc
Marc
Re: Wouter's PH18 Namibia
Thanks gents!!
Peter, that is why boats are female
Peter, that is why boats are female
Re: Wouter's PH18 Namibia
Got the inside glassed today. Pretty happy with how it came out. Took me 10 hrs non stop, all wet on wet.
Corners done!
Added a full piece on the sides, extra strength for the chine corners
Done
Corners done!
Added a full piece on the sides, extra strength for the chine corners
Done
Re: Wouter's PH18 Namibia
Really fine glass work. Like your shop. John
Re: Wouter's PH18 Namibia
Thanx John.
The workshop is nice and spacious plenty of room for everything. Just gets a bit hot in there! But have a camping freezer hooked up to keep the drinks cold and close by!
The workshop is nice and spacious plenty of room for everything. Just gets a bit hot in there! But have a camping freezer hooked up to keep the drinks cold and close by!
Re: Wouter's PH18 Namibia
Wouter - what he said - nice clean work. If I may, i would like to pass on what others have demonstrated on this forum and what I learned the hard way - neat, clean work pays off huge. I am not a patient man and when I have rushed and not taken the extra time to slow down and produce neat tidy work, it has cost me in material, re-work effort, etc. Nothing worse then grinding and sanding sh*&^t when you dont have to....
Cheers, Happy Birthday Queen Victoria!
Cheers, Happy Birthday Queen Victoria!
My Son calls me "The Fish Whisperer" I love it !
- Cracker Larry
- * Bateau Builder - Expert *
- Posts: 22491
- Joined: Fri Mar 11, 2005 3:39 pm
- Location: Savannah, GA
Re: Wouter's PH18 Namibia
What they said, very clean and good work. A little extra time spent working clean saves hours of grinding and sanding later.
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose
Re: Wouter's PH18 Namibia
Thanx Mark and CL,
Yeah, agreed! It's worth spending the extra time to prepare properly. I had all the fg pieces pre cut and to the correct size. Laid them down on a table in order of use. Also pre measured the resin/hardener in cups ala CL style. (that's been a great tip I picked up from his forum) Also stocked up on enough rollers so I wouldn't run out!
Although it was a long day, it was a very pleasurable one too! Just love seeing a plan come together!
Away on a work trip for the next two weeks, then on to the stringers.
Yeah, agreed! It's worth spending the extra time to prepare properly. I had all the fg pieces pre cut and to the correct size. Laid them down on a table in order of use. Also pre measured the resin/hardener in cups ala CL style. (that's been a great tip I picked up from his forum) Also stocked up on enough rollers so I wouldn't run out!
Although it was a long day, it was a very pleasurable one too! Just love seeing a plan come together!
Away on a work trip for the next two weeks, then on to the stringers.
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot] and 6 guests