Woods Skoota 32DM
Re: Woods Skoota 32DM
Nice FallGuy!!! Jeff
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
A couple more panels under vac. Working alone. Ray has bladder cancer and they took his out last week.
The cancer and chemo had weakened him badly and he wasn't really able to work.
So I am on my own now.
The cancer and chemo had weakened him badly and he wasn't really able to work.
So I am on my own now.
-
- * Bateau Builder *
- Posts: 2433
- Joined: Tue Jun 07, 2016 6:55 pm
- Location: Bush Alaska
- Location: Bush Alaska
Re: Woods Skoota 32DM
I hope your friend is able to recover well.
Ill bet he wishes he was working with you.
Ill bet he wishes he was working with you.
Re: Woods Skoota 32DM
I hope a speedy recovery of Ray!!! Sounds really difficult!!! Jeff
Re: Woods Skoota 32DM
Well wishes for Ray, Fallguy!
I suspect that even alone you are a few times more productive than many others(ok, me) are with help.
I suspect that even alone you are a few times more productive than many others(ok, me) are with help.
There are only two seasons in Vermont: boating season, and boat-building season.
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
- OrangeQuest
- Very Active Poster
- Posts: 3944
- Joined: Tue Aug 28, 2018 1:14 pm
- Location: Houston, Texas
Re: Woods Skoota 32DM
Oh.. that looks like that helm thing you have been working on! That has got to be exciting to get to that point!
Sorry to hear about your helper/buddy... hope he has a fast recovery and all goes well for him.
Sorry to hear about your helper/buddy... hope he has a fast recovery and all goes well for him.
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne
A. A. Milne
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
Well, all the helm riser parts are built. The benchtop gets screwed onto the final part.
Floor trimmings from bag wirk.
Ready to glue seams.
Floor trimmings from bag wirk.
Ready to glue seams.
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
Wish I had fast epoxy. After glue, I gotta wait a day.
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
Well, the helm stand is all glued and taped and I taped about 4 pounds of tape and epoxy in the cabin yesterday. Ran a space heater in there overnite.
Today is a sanding day. Again.
I will try to get some fairing compounds applied as well.
Last nite there was a pack of coyotes in our yard going absolutely apeshit. Three other packs answered them back.
Today is a sanding day. Again.
I will try to get some fairing compounds applied as well.
Last nite there was a pack of coyotes in our yard going absolutely apeshit. Three other packs answered them back.
Re: Woods Skoota 32DM
Looks really good FallGuy!! Coyotes are always a pain!!!
Who is online
Users browsing this forum: No registered users and 16 guests