Woods Skoota 32DM
- Jaysen
- * Bateau Builder *
- Posts: 6500
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Woods Skoota 32DM
If your using nema based relays make sure you have a manual bypass. I’ve heard nothing but trouble with them from cruisers.
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
The czone has a nmea bypass, but the stuff needs to be wired. The fuses have two positions. One is for digital switcjing and the other is for hot if I understand it correctly.
But it is all so odd. The wiring is done and the switches all backfeed the panel(s).
To make it more complex. Some of my stuff is 12v and some is 24v.
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
Well, hot n muggy.
Trying to get the carbon overlay vac bagged on...maybe Friday morning.
I gotta bag the back as well here. And trying to make the gum tape removal easier so laying it over masking tapes.
Hoping the heat doesn't make it all fall off.
Trying to get the carbon overlay vac bagged on...maybe Friday morning.
I gotta bag the back as well here. And trying to make the gum tape removal easier so laying it over masking tapes.
Hoping the heat doesn't make it all fall off.
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
Overlay out of the bag. One indent in an old hole. Cutting out now. Hoping no slip ups.
Re: Woods Skoota 32DM
Beautiful work FallGuy!!!! Jeff
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: Woods Skoota 32DM
Looking pretty good, Dan.
The bag seems to be the best tool for tasks like this. You’re a vac bag wizard!
The bag seems to be the best tool for tasks like this. You’re a vac bag wizard!
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
I wish..Dan_Smullen wrote: ↑Sun Jun 27, 2021 9:26 am Looking pretty good, Dan.
The bag seems to be the best tool for tasks like this. You’re a vac bag wizard!
I screwed up and bonded the breather to the part edges and spent about an hour removing poly fibers. In my defense, the breather was hard to hold up there and the area was hard to bag.
-
- * Bateau Builder - Expert *
- Posts: 10199
- Joined: Tue Jan 12, 2010 12:25 am
Re: Woods Skoota 32DM
Dropping in components. It is about 100F or more up there now. Ugh.
Re: Woods Skoota 32DM
Looks really good FallGuy!!! Jeff
Re: Woods Skoota 32DM
Love the black instrument panel!
Who is online
Users browsing this forum: Ahrefs [Bot] and 8 guests