Re: Woods Skoota 32DM
Posted: Fri Sep 04, 2020 7:51 am
Nice Fallguy!!! She is a beauty!!! Jeff
HUGE milestone and boat! She looks good! Boat Builder Central - Builder Forums
Technical Support Message Board and Builder Forums
https://www.community.boatbuildercentral.com/forum/
Woods Skoota 32DM
https://www.community.boatbuildercentral.com/forum/viewtopic.php?t=62495
Page 171 of 263
Re: Woods Skoota 32DM
Posted: Fri Sep 04, 2020 7:53 am
HUGE milestone and boat! She looks good! Re: Woods Skoota 32DM
Posted: Sun Sep 06, 2020 8:03 pm
Impressive.
Re: Woods Skoota 32DM
Posted: Sun Sep 06, 2020 10:59 pm
Hell yeah. Congratulations!
Re: Woods Skoota 32DM
Posted: Mon Sep 14, 2020 11:27 pm
Today, I worked on cockpit stuff.
This is a welded strapped angle iron. It is riveted to the beam.
This is a welded strapped angle iron. It is riveted to the beam.
Re: Woods Skoota 32DM
Posted: Tue Sep 15, 2020 12:23 am
Angle iron or aluminium?
Re: Woods Skoota 32DM
Posted: Tue Sep 15, 2020 1:15 am
Stainless angle iron and stainless strapping with aluminum rivets into aluminum beam. Some galvanics might occur in the rivet or in the holes in the beam.. time will tell
Re: Woods Skoota 32DM
Posted: Tue Sep 15, 2020 3:37 am
Any reputable aluminium mast and spar builder will be able to advise on the longevity of SS and Al combos in marine environments.
My understanding is that they are at times failures waiting to happen, but I'm no expert, hence the suggestion to check with one.
Congratulations on the huge hull and cabin assembly milestone.
My understanding is that they are at times failures waiting to happen, but I'm no expert, hence the suggestion to check with one.
Congratulations on the huge hull and cabin assembly milestone.
Re: Woods Skoota 32DM
Posted: Tue Sep 15, 2020 5:39 am
The company wouldn't even talk to me and would only give me the name of a distributor. They generally only sell to large boat manifacturers.glossieblack wrote: ↑Tue Sep 15, 2020 3:37 am Any reputable aluminium mast and spar builder will be able to advise on the longevity of SS and Al combos in marine environments.
My understanding is that they are at times failures waiting to happen, but I'm no expert, hence the suggestion to check with one.
Congratulations on the huge hull and cabin assembly milestone.
Re: Woods Skoota 32DM
Posted: Tue Sep 15, 2020 5:46 am
Did you try the rivet manufacturer?