Your boat is coming out beautifully. Keep up the nice work.
Dave
Bob's FS18
Re: Bob's FS18
Thanks Jeff and Dave! In the middle of taping frames and gluing cleats, I've also been working on the small grab bar console/coffin box
I decided to make a mold to build the hatch gutter out of fiberglass. Cloth "remnants" from the hull lamination were used to lay it up
Got the gutter trial fit and glued into place with yet another high tech clamp system.
Trimmed the excess and ready to move on
I decided to make a mold to build the hatch gutter out of fiberglass. Cloth "remnants" from the hull lamination were used to lay it up
Got the gutter trial fit and glued into place with yet another high tech clamp system.
Trimmed the excess and ready to move on
Re: Bob's FS18
Again, really nice work Bob!!!! Jeff
Re: Bob's FS18
This post brings me up to date. The weather has been too cold lately to get a good pour of foam, so I decided to switch gears and paint the exterior of the hull. Took it to a friends shop that's big enough for a makeshift paint booth. After a final coat of primer and sanding, we got on the finish coat. It will be back on the trailer and headed home tomorrow so I can get back to the interior.
-
- * Bateau Builder *
- Posts: 275
- Joined: Fri Aug 31, 2018 8:03 pm
- Location: Kissimmee FL.
Re: Bob's FS18
Nice looking boat.
Re: Bob's FS18
Beautiful!
Re: Bob's FS18
Beautiful work!!! Jeff
Re: Bob's FS18
The photos of the painted hull in the makeshift paint booth didn't do it justice, so I took some when I got the boat back home and onto the strong back. Really excited with how it came out.
A little more progress on the console. I made the top/dash out of teak and started working on the hatch cover.
First coat of epoxy on the teak. Final finish coats will be spar varnish
A little more progress on the console. I made the top/dash out of teak and started working on the hatch cover.
First coat of epoxy on the teak. Final finish coats will be spar varnish
Re: Bob's FS18
Very nice work and the paint looks great!!!! Jeff
-
- * Bateau Builder - Expert *
- Posts: 8938
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Bob's FS18
That is a whole bunch of dang fine looking work right there.
This is going to be a really nice boat.
This is going to be a really nice boat.
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 7 guests