C19 in Richmond, VA
-
- * Bateau Builder *
- Posts: 1662
- Joined: Sat Jan 10, 2015 7:13 pm
- Location: New Zealand
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: C19 in Richmond, VA
I’ve been thinking about those. Put them on the bot when the kids are riding, but leave them on the beach when it’s the boys looking for fish.OneWayTraffic wrote: ↑Mon May 10, 2021 1:27 am Couple of marine beanbags. Movable and makeshift flotation.
-
- * Bateau Builder *
- Posts: 1662
- Joined: Sat Jan 10, 2015 7:13 pm
- Location: New Zealand
Re: C19 in Richmond, VA
Adults like them too appaently. More comfy than any bench or chair. Good option. You can get in any size you care to.
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: C19 in Richmond, VA
Nice Dan!!! Jeff
Re: C19 in Richmond, VA
Cleaner than my kitchen!Dan_Smullen wrote: ↑Wed May 12, 2021 9:34 pm One coat of Interlux Bilgecoat from BBC applied over Silver Tip Yacht Primer.
Just realized there are very few C19 build threads, you're a pioneer on this design.
There are only two seasons in Vermont: boating season, and boat-building season.
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: C19 in Richmond, VA
A handful of C17s, and a few 21s, but you're right, one has to dig a little for pics. I hope she's up there with Tom's and Welleflicker's when she's done.VT_Jeff wrote: ↑Thu May 13, 2021 9:33 amCleaner than my kitchen!Dan_Smullen wrote: ↑Wed May 12, 2021 9:34 pm One coat of Interlux Bilgecoat from BBC applied over Silver Tip Yacht Primer.
Just realized there are very few C19 build threads, you're a pioneer on this design.
Re: C19 in Richmond, VA
Taking nothing away from those builds, I have little doubt you'll reset the bar.Dan_Smullen wrote: ↑Thu May 13, 2021 1:59 pmA handful of C17s, and a few 21s, but you're right, one has to dig a little for pics. I hope she's up there with Tom's and Welleflicker's when she's done.VT_Jeff wrote: ↑Thu May 13, 2021 9:33 amCleaner than my kitchen!Dan_Smullen wrote: ↑Wed May 12, 2021 9:34 pm One coat of Interlux Bilgecoat from BBC applied over Silver Tip Yacht Primer.
Just realized there are very few C19 build threads, you're a pioneer on this design.
There are only two seasons in Vermont: boating season, and boat-building season.
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: C19 in Richmond, VA
Bilge Kote eventually dried. The heavy spots took a few days at 60-65 degrees.
Cut and dry fit the anchor locker floor. Butt joint in the middle with a run of 12oz tape, then worked on some support structure.
Laminated 2 pcs of 12mm together for the struts. White oak for the cleat on the bulk head.
I typically save the beer for the end of the day, but yesterday indulged earlier than usual, and in haste, mis-marked the center of this cleat, and glued it on in the wrong spot. Only off by and inch..
Quick fix with the multi tool on one end, and an "adder" on the other.
Cut and dry fit the anchor locker floor. Butt joint in the middle with a run of 12oz tape, then worked on some support structure.
Laminated 2 pcs of 12mm together for the struts. White oak for the cleat on the bulk head.
I typically save the beer for the end of the day, but yesterday indulged earlier than usual, and in haste, mis-marked the center of this cleat, and glued it on in the wrong spot. Only off by and inch..
Quick fix with the multi tool on one end, and an "adder" on the other.
Re: C19 in Richmond, VA
Way to own it!
"I cut a board, it was too short. Cut it again, still too short".
Morbid curiousity: is this another drank-too-soon do-over? The glue line looks suspiciously like something that was scabbed back on.
I like the bevel, btw, I skipped it on my bow sole and it cost me a lot of peanut buttet.
"I cut a board, it was too short. Cut it again, still too short".
Morbid curiousity: is this another drank-too-soon do-over? The glue line looks suspiciously like something that was scabbed back on.
I like the bevel, btw, I skipped it on my bow sole and it cost me a lot of peanut buttet.
There are only two seasons in Vermont: boating season, and boat-building season.
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie
Who is online
Users browsing this forum: No registered users and 10 guests