Page 12 of 21
Re: LM18 Houston Tx
Posted: Tue Sep 07, 2021 5:41 pm
by TomW1
Great progress and really like the color.
Tom
Re: LM18 Houston Tx
Posted: Tue Sep 07, 2021 5:59 pm
by Fuzz
There is a ton of work that got done in that set of pictures! Your glass work looks really good too.
Re: LM18 Houston Tx
Posted: Tue Sep 14, 2021 11:24 pm
by ericwensel
Some more work. I have a bit more work to do under the deck but i am getting close to gluing the deck down and glassing. That will be a big milestone and i am getting a little extra motivation knowing that is just around the corner.
Re: LM18 Houston Tx
Posted: Sat Nov 13, 2021 6:00 pm
by ericwensel
A little more progress on a nice cool weekend.
One of the forward rod holders glued in place. Will fillet and fiberglass the edge later.
Gluing the aft rod holders in place.
Fiberglassing the hatches.
Re: LM18 Houston Tx
Posted: Wed Dec 08, 2021 7:59 pm
by KurtActual
I saw earlier you mentioned you're in West Houston. I'd love to see the boat sometime! I am in NW Houston, Cypress area. Hoping to convince the wife to lend me the garage to let me build one of these...
Re: LM18 Houston Tx
Posted: Thu Dec 09, 2021 8:31 pm
by ericwensel
KurtActual wrote: ↑Wed Dec 08, 2021 7:59 pm
I saw earlier you mentioned you're in West Houston. I'd love to see the boat sometime! I am in NW Houston, Cypress area. Hoping to convince the wife to lend me the garage to let me build one of these...
You might want to let your wife know that you will be borrowing it for a couple years.
Feel free to come by to check it out. You can private message and i can give you my address and contact info.
Re: LM18 Houston Tx
Posted: Fri Dec 24, 2021 2:02 pm
by ericwensel
Added rails for gunnel cap.
Put in conduit for starter cable.
Added ends to cables and connected to terminal blocks.
Re: LM18 Houston Tx
Posted: Wed Dec 29, 2021 8:55 pm
by VT_Jeff
Those cable runs are serious as a heart attack! Great work!
Re: LM18 Houston Tx
Posted: Wed Dec 29, 2021 9:11 pm
by Jeff
Nice work Eric!!!! Jeff
Re: LM18 Houston Tx
Posted: Wed Dec 29, 2021 11:26 pm
by Fuzz
Jeff wrote: ↑Wed Dec 29, 2021 9:11 pm
Nice work Eric!!!! Jeff
X2