CX19 splashed - Finally

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
User avatar
APLJaK
Active Poster
Active Poster
Posts: 218
Joined: Fri Aug 21, 2009 12:39 am
Location: Okanagan Valley, BC Canada
Contact:

Re: CX19 splashed - Finally

Post by APLJaK »

fallguy1000 wrote: Wed Sep 08, 2021 8:14 am Great writeup. You are sure a detailed and exceptional writer as well.

I am going to build a bay boat and am trying to decide what it will be. What does the boat draft?
Sorry missed this earlier. By design I believe it is 20cm (8"). I applied the graphite bottom at the DWL. In the water, it is dead on at the bow and slightly more at the stern. Pretty typical I think. I would love to see it on plane, but until I can find someone to record it for me I have to guess. If you look closely between the trailer pic and the water pic you can see the black line. From the side, it appears as it draws almost no water.

Dan_Smullen
* Bateau Builder *
* Bateau Builder *
Posts: 912
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: CX19 splashed - Finally

Post by Dan_Smullen »

She looks great, as a C19 should!

What size motor is that?

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8921
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: CX19 splashed - Finally

Post by Fuzz »

A lot of the time I end up loading in a lot of wind and or current so all my trailers have pretty large side boards on them. It sure makes it easier as all you have to do is get the nose in and she will self centre :D

User avatar
APLJaK
Active Poster
Active Poster
Posts: 218
Joined: Fri Aug 21, 2009 12:39 am
Location: Okanagan Valley, BC Canada
Contact:

Re: CX19 splashed - Finally

Post by APLJaK »

Dan_Smullen wrote: Wed Sep 08, 2021 3:23 pm She looks great, as a C19 should!

What size motor is that?
Yamaha F115B

Dan_Smullen
* Bateau Builder *
* Bateau Builder *
Posts: 912
Joined: Tue Aug 13, 2019 3:02 pm
Location: VA

Re: CX19 splashed - Finally

Post by Dan_Smullen »

APLJaK wrote: Wed Sep 08, 2021 4:47 pm
Dan_Smullen wrote: Wed Sep 08, 2021 3:23 pm She looks great, as a C19 should!

What size motor is that?
Yamaha F115B
Can’t go wrong with that. Do you have an build album? I’d love to see how you tackled some of the same challenges.

User avatar
APLJaK
Active Poster
Active Poster
Posts: 218
Joined: Fri Aug 21, 2009 12:39 am
Location: Okanagan Valley, BC Canada
Contact:

Re: CX19 splashed - Finally

Post by APLJaK »

I hadnt done a very good job of updating my build log so I spent today adding some pictures documenting the build process. Hope I added them in the correct place.

viewtopic.php?t=29354[url]https://www.c ... hp?t=29354[/url]

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8921
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: CX19 splashed - Finally

Post by Fuzz »

Well I am not seeing the pictures :cry:

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 14 guests