You are on a great pace, keep it up.
Joel
Panga 20 West Central Florida
- tech_support
- Very Active Poster
- Posts: 12318
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Vero Beach, FL
- Contact:
-Finished all layers of the whole rubrail...
-Removed all the 'peelply substitute'...
-Laminated a 12' 1x1 for the keel..will sand to shape per plan
-Removed all of the extra braces from strongback
-Removed the motorwell sides from the jig
-WAS ABLE TO GET THE BOW MOLD OUT!! ( I expected it to be welded to the side and bottom panels)
-Loaded the sander with 120 grit...fairing starts tomorrow.
-Removed all the 'peelply substitute'...
-Laminated a 12' 1x1 for the keel..will sand to shape per plan
-Removed all of the extra braces from strongback
-Removed the motorwell sides from the jig
-WAS ABLE TO GET THE BOW MOLD OUT!! ( I expected it to be welded to the side and bottom panels)
-Loaded the sander with 120 grit...fairing starts tomorrow.
- attownsend
- Active Poster
- Posts: 439
- Joined: Sun Nov 07, 2004 3:50 pm
- Location: west palm beach florida
Now this is where the fun begins,just kidding.Build on Dude.If isn't Boening I not going. Evild BTW if I can do it anyone can.JASmine wrote:-Finished all layers of the whole rubrail...
-Removed all the 'peelply substitute'...
-Laminated a 12' 1x1 for the keel..will sand to shape per plan
-Removed all of the extra braces from strongback
-Removed the motorwell sides from the jig
-WAS ABLE TO GET THE BOW MOLD OUT!! ( I expected it to be welded to the side and bottom panels)
-Loaded the sander with 120 grit...fairing starts tomorrow.
If it ain't Boeing,I ain't going.Evild
-
- Very Active Poster
- Posts: 587
- Joined: Mon Nov 10, 2003 1:00 am
- Location: Valley Springs, Calif.
FUN? We don't need no stinkin' FUN!JASmine wrote:OK....who said this was the FUN part (fairing) ??
I'm almost 68 yrs. old now. My shoulders are so sore I can barely lift my arms. But I'm finally ready to prime. Fairing is where my discipline broke down. It took about 3 times longer than it should have.
Who is online
Users browsing this forum: No registered users and 18 guests