The Big Red SK....15???

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
redfishjim
Frequent Poster
Frequent Poster
Posts: 46
Joined: Wed Dec 31, 2014 3:57 pm
Location: Texas

The Big Red SK....15???

Post by redfishjim »

I'm nearing the end Bateau, you inspirational beautiful bunch. I started my SK14 adventure early June and just put the topcoat on the hull last weekend. I used the metric plans and scaled up 7%, the max I could get without buying more than 7 sheets of ply. Also raised the sides an extra inch on top of the 7%. The boat measures 15'4" LOA, with a 52" Beam. I wanted a bigger version since I'm bigger than most, at 6'4" and around 3 tubs...

At this point I just need to pretty up my front hatch, epoxy the topside, fare, prime, and paint. This was my first time messing with marine paint, chose to go with Awlgrip Topcoat, sprayed easily enough, Sunfast Red is the hull color. I also need to rehabilitate a small galvanized McClain trailer I picked up for $100.00.

Lesson learned in hind sight for next build - The heat and hardness of the flotation foam caused the sides to warp a bit near the transom . I've noticed afterwards, that I'm not the only one that's happened to. Getting the rub rail installed right after the frames/stringers I think would have made the sides rigid enough to prevent that warp. Next time the rub rail is going on right after stringers/frames.

Shout out to "Seaslug" for the helpfull phone calls and the inspiration his builds had on me, and also "Willg" here in the Woodlands, TX. Met Will last year and saw his PH18, really pushed me over the edge in getting a build going, his boat is a work of art if you haven't seen it on here.
Attachments
Sheet Cut Layout.jpg
20180513_183852.jpg
20180514_232152.jpg
20180516_221500.jpg
20180520_160403.jpg
20180522_201127.jpg
20180526_170550.jpg
20180613_215308.jpg
20180625_215257.jpg
20180722_223026.jpg
20181007_163150.jpg
20181027_201941.jpg
20181027_201955.jpg
20181030_222627.jpg
Last edited by redfishjim on Tue Nov 13, 2018 12:50 am, edited 4 times in total.

redfishjim
Frequent Poster
Frequent Poster
Posts: 46
Joined: Wed Dec 31, 2014 3:57 pm
Location: Texas

Re: The Big Red SK....15???

Post by redfishjim »

You can see the warp in the sides real easy before the rub rail was installed. I'll show you my best attempt to fix this while installing the rubrail. Using wood supports to press the sides in to the shape I wanted, then epoxyed the rubrail into place. Got it a lot less noticable.
Attachments
20180628_075148.jpg
20180722_223045.jpg

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8921
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: The Big Red SK....15???

Post by Fuzz »

A beautiful stealth build. Now you have to show us the rest as you go along :D

User avatar
OrangeQuest
Very Active Poster
Very Active Poster
Posts: 3944
Joined: Tue Aug 28, 2018 1:14 pm
Location: Houston, Texas

Re: The Big Red SK....15???

Post by OrangeQuest »

Nice looking paint!
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne

Jeff
Site Admin
Site Admin
Posts: 8436
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: The Big Red SK....15???

Post by Jeff »

Nice build redfishjim!! And really nice paint job!! Jeff

Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 3296
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

Re: The Big Red SK....15???

Post by Dougster »

Very nice, makes me want to take mine out today. Well, not really, a norther came in last night, no fun in the wind. I love the color and like the 7% solution.

Dougster

redfishjim
Frequent Poster
Frequent Poster
Posts: 46
Joined: Wed Dec 31, 2014 3:57 pm
Location: Texas

Re: The Big Red SK....15???

Post by redfishjim »

Thanks everyone. I chose Awlgrip because I view it as the standard of a good marine paint, going into it I read countless threads of goods and bads of the product. I think if you spray on light coats, I used 3, and give it ample amount of time to flash off inbetween coats, about an hour, it's not bad. I sprayed the recommended mix 1:1:1/4 Topcoat/Converter/Reducer in a bluebird 75 degree light northerner. Used 28lbs at the gun with trigger pulled, almost full fan, with a Harbor Frieght Professional Gun 1.4 tip. I think a 1.1-1.2 tip would be even better.

Looking back at the last pic made me think of another "don't do". Don't use any Pine bonnets for your deck supports along the hull, they don't flex enough and will cause an uneven bend in the hull. USE CHERRY, much more flex. It took me 10 times the amount of fairing as it should have to hide this mistake on the outside of the hull.

Jeromesfs14ls
Frequent Poster
Frequent Poster
Posts: 32
Joined: Tue Jul 10, 2018 9:06 pm
Location: Lee’s Summit MO

Re: The Big Red SK....15???

Post by Jeromesfs14ls »

Looks very nice, great job.

redfishjim
Frequent Poster
Frequent Poster
Posts: 46
Joined: Wed Dec 31, 2014 3:57 pm
Location: Texas

Re: The Big Red SK....15???

Post by redfishjim »

Final tape and masking this evening, first good weather, final paint is going on the topside

Seadek and my 4 x 8 Scupper (https://www.carolinaboatoutfitters.com/ ... 82168.html) arrived last month. Grab rail and rub rail should be here by the end of the week, fun times!
Attachments
20190105_153051.jpg
20190105_135550.jpg

Jeff
Site Admin
Site Admin
Posts: 8436
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: The Big Red SK....15???

Post by Jeff »

redfishjim, really well done!!! Jeff

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests