SK14 in N Florida
-
- Frequent Poster
- Posts: 16
- Joined: Thu Sep 12, 2019 10:25 pm
- Location: North Florida
Re: SK14 in N Florida
I did, in response to a post I saw here, attempt to upload them to the gallery before I contacted Reid. I frequently upload photos using methods similar to those used here with no issue.
Re: SK14 in N Florida
Reid spent a whole bunch of time on this yesterday and was not able to get the photos loaded. I am hoping Jaysen sees this thread and offers to upload for you. He seems to have a method that always works!!! Jeff
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: SK14 in N Florida
This thread is "broken"... Give me a few more minutes...
ok... uploaded to my gallery then used BBCODE image tag and key from gallery to include
Bow stitch inside
Bow
Lengthwise
Rear interior
ok... uploaded to my gallery then used BBCODE image tag and key from gallery to include
Bow stitch inside
Bow
Lengthwise
Rear interior
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: SK14 in N Florida
and for the record, I'm not able to get my alaska picture to upload. bah
Re: SK14 in N Florida
Jaysen, thank you very much!!! Please get those Alaska photos uploaded when possible!! Thank you again, Jeff
-
- Frequent Poster
- Posts: 16
- Joined: Thu Sep 12, 2019 10:25 pm
- Location: North Florida
Re: SK14 in N Florida
It was the gallery that I was not able to upload. Guess I'll give it another try.
-
- Frequent Poster
- Posts: 16
- Joined: Thu Sep 12, 2019 10:25 pm
- Location: North Florida
Re: SK14 in N Florida
Also, we just got back from Alaska last month.Had a great time, look forward to your photos.
-
- Frequent Poster
- Posts: 16
- Joined: Thu Sep 12, 2019 10:25 pm
- Location: North Florida
Re: SK14 in N Florida
Probably been noted here before but while sanding the inside corners of fillets this morning, I knew I needed a better way. A Dremel tool with flex shaft and one of the 5/8" drum sleeves makes neat and quick work of this job. And the sleeve proved to be long lasting.
- Explorer 19TV
- * Bateau Builder *
- Posts: 534
- Joined: Tue Sep 04, 2018 10:45 am
- Location: Okeechobee, FL
Re: SK14 in N Florida
Welcome foto, thats a fun boat to build my son and I built one. We just remodeled it for an outboard. Looks like your making good progress.
If you don’t have one I would definitely recommend purchasing a vibe saw it will be your best friend.
Also I found that during assembly small tack welds with thickened epoxy work great then I came back all wet on wet no need for sanding fillets. It’s a very easy process.
If you don’t have one I would definitely recommend purchasing a vibe saw it will be your best friend.
Also I found that during assembly small tack welds with thickened epoxy work great then I came back all wet on wet no need for sanding fillets. It’s a very easy process.
- Explorer 19TV
- * Bateau Builder *
- Posts: 534
- Joined: Tue Sep 04, 2018 10:45 am
- Location: Okeechobee, FL
Re: SK14 in N Florida
All wet on wet no sanding
Who is online
Users browsing this forum: No registered users and 6 guests