Boat Builder Central - Builder Forums

That's a great photo of what is clearly a superbly constructed boat.

The stringer on the starboard side was the worst as far as level goes. Now that the cleats are on and level is established.
I have a considerable gap to fill there. My approach is to use scrap marine ply to gap fill the top of the stringer.
I used some 3/8" and 1/4" to get this done. Once the wood glue sets I can encapsulate that with epoxy glue.





Other than that I'm slinging more mud to get these filled.





Once all of this is done I'm going to use a pencil grinder to undercut the dowels on the cleats.
Then I will fill those with epoxy glue.

Looking good Eric!!

Squeaky clean as always! Nice work!

Eric, I am watching your build, I don't reply or post much but just wanted to say looks like your doing a fantastic job, That will be one fine boat.
Just watching from Arizona,
Larry B

Thanks Larry.

I am a little jealous of this build. It will be a kick ass boat when done and about 15% of the work of the Skoota dm.

I am feeling a bit overwhelmed these days.

Hey Fallguy, both Eric's and your builds are A1 first class sensational. Don't forget you're building two boats.

glossieblack wrote: ↑Sat Nov 09, 2019 4:57 am Hey Fallguy, both Eric's and your builds are A1 first class sensational. Don't forget you're building two boats.

AT THE SAME TIME!! But I agree, both Eric and Fallguy are doing fantastic jobs.