Sorry I missed you posting this, CONGRAULATIONS on passing!! Love it when you get a nice officer!
Your boat looks great!
Xf20
- OrangeQuest
- Very Active Poster
- Posts: 3948
- Joined: Tue Aug 28, 2018 1:14 pm
- Location: Houston, Texas
Re: Xf20
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne
A. A. Milne
-
- Frequent Poster
- Posts: 151
- Joined: Sun Nov 27, 2016 8:32 pm
- Location: OZello FL
Re: Xf20
Thanks OQ!
-
- * Bateau Builder - Expert *
- Posts: 6725
- Joined: Thu Sep 13, 2007 9:13 pm
- Location: Dade City, Florida
Re: Xf20
Sounds like fun!Freaknreakn wrote: ↑Thu Feb 14, 2019 7:20 pm
Thanks for your input Richard. Look forward to hunting some snook with ya.
Could also hunt some gags, there is plenty of them just offshore from you.
Richard
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe, FS18 “Bare Bones”, GF12
Currently building...PY12 Kayak
viewtopic.php?f=12&t=62146
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe, FS18 “Bare Bones”, GF12
Currently building...PY12 Kayak
Bare Bones build thread...If there is magic on this planet, it is contained in water. - Loren Eiseley
viewtopic.php?f=12&t=62146
-
- Frequent Poster
- Posts: 151
- Joined: Sun Nov 27, 2016 8:32 pm
- Location: OZello FL
Re: Xf20
Are you implying I need to build another boat to go off shore
I know your slam busy building cabinets. When you find time throw me some dates.
I know your slam busy building cabinets. When you find time throw me some dates.
-
- Frequent Poster
- Posts: 151
- Joined: Sun Nov 27, 2016 8:32 pm
- Location: OZello FL
Re: Xf20
Sorry it’s been a while and I’ve been neglectful in updates. Since February and the pass on inspection, I’ve worked on and not in order; rub rail, raised platform, console, leaning post, transom cap, hatches, refinishing hatches, jackplate, powerpoles, trimtabs, trolling motor, motor with lower unit nose cone from Bob’s. This week I will try out a couple props and try and splash this weekend. I’ll keep my fingers crossed. Here are some pictures.
-
- Frequent Poster
- Posts: 151
- Joined: Sun Nov 27, 2016 8:32 pm
- Location: OZello FL
-
- Frequent Poster
- Posts: 151
- Joined: Sun Nov 27, 2016 8:32 pm
- Location: OZello FL
-
- * Bateau Builder *
- Posts: 1794
- Joined: Tue Apr 29, 2008 8:58 pm
- Location: High Springs, FL
Re: Xf20
Looks awesome!
My XF is currently at the shop awaiting my pickup, with a new E-Tec 90. So if by chance you could find some use out of my old props, I could probably hook you up. The E-Tec prop is much different than the those that fit older Yamaha 2-strokes, so I had to order a new one for the new engine. It’s a PowerTech 4 blade stainless, 13.25” Diam. and 13 pitch...ordered the same one I was using, just made for the E-Tec. It’s a “flats cup”. They may be able to re-hub it to fit your Honda.
My XF is currently at the shop awaiting my pickup, with a new E-Tec 90. So if by chance you could find some use out of my old props, I could probably hook you up. The E-Tec prop is much different than the those that fit older Yamaha 2-strokes, so I had to order a new one for the new engine. It’s a PowerTech 4 blade stainless, 13.25” Diam. and 13 pitch...ordered the same one I was using, just made for the E-Tec. It’s a “flats cup”. They may be able to re-hub it to fit your Honda.
-
- Frequent Poster
- Posts: 151
- Joined: Sun Nov 27, 2016 8:32 pm
- Location: OZello FL
-
- * Bateau Builder *
- Posts: 1794
- Joined: Tue Apr 29, 2008 8:58 pm
- Location: High Springs, FL
Re: Xf20
You need to peel off that Microdraft lettering on the trailer. I’d hate for people to see that and not give you credit for the hard work
Who is online
Users browsing this forum: No registered users and 20 guests