Page 4 of 6
Re: CS23
Posted: Tue Sep 15, 2020 12:43 pm
by erich.resch@gmx.at
thank you friends i will do that
Re: CS23
Posted: Wed Sep 16, 2020 2:54 pm
by Dan_Smullen
Wow! That is one crisp looking keel!
Re: CS23
Posted: Thu Sep 17, 2020 11:11 am
by erich.resch@gmx.at
thank you
Re: CS23
Posted: Sun Sep 20, 2020 1:41 am
by RomanVilgut
erich.resch@gmx.at wrote: ↑Tue Sep 15, 2020 5:09 am
Hi
I will use it in Croatia I have now finished laminating the hull everything is straight! 6 hours on Sunday alone that was very hard, wet in wet laminating
Hi Erich! What about the Danube? Btw: Glad to see another Austrian building a boat. I live in Graz and build in Villach. Where are you from?
Here is my build
https://forums.bateau2.com/viewtopic.ph ... 55#p474455
glg
Re: CS23
Posted: Tue Sep 22, 2020 1:52 pm
by erich.resch@gmx.at
Hallo Roman
Ich bin vom Bezirk Bruck Leitha
Ich habe keinen Führerschein für die Donau Außerdem fahre ich gern Fischen in Kroatien auch Spearfischen das ist bei uns sowieso verboten
LG Erich
Re: CS23
Posted: Tue Sep 22, 2020 2:53 pm
by fallguy1000
erich.resch@gmx.at wrote: ↑Tue Sep 22, 2020 1:52 pm
Hallo Roman
Ich bin vom Bezirk Bruck Leitha
Ich habe keinen Führerschein für die Donau Außerdem fahre ich gern Fischen in Kroatien auch Spearfischen das ist bei uns sowieso verboten
LG Erich
Wo Fischen Kroatia?
Meine Duetsch is nicht so gut!
Where do you fish in Croatia?
Re: CS23
Posted: Tue Sep 22, 2020 4:38 pm
by RomanVilgut
erich.resch@gmx.at wrote: ↑Tue Sep 22, 2020 1:52 pm
Hallo Roman
Ich bin vom Bezirk Bruck Leitha
Ich habe keinen Führerschein für die Donau Außerdem fahre ich gern Fischen in Kroatien auch Spearfischen das ist bei uns sowieso verboten
LG Erich
Verstehe, klingt sehr spannend. Fischen hab ich noch nicht probiert. Ich baue das Boot vor allem zum Cruisen.
Translation:. Sounds thrilling. I did not try fishing yet myself. I am building my boat for cruising
Re: CS23
Posted: Wed Sep 23, 2020 10:48 am
by erich.resch@gmx.at
Re: CS23
Posted: Wed Sep 23, 2020 1:47 pm
by fallguy1000
Cool. Thanks for sharing!
Re: CS23
Posted: Fri Aug 13, 2021 8:56 am
by erich.resch@gmx.at
Hello, I have a question for jacques I have lengthened my stringers by 72cm and laminated them inside and made a bracket like in the pictures I laminated the stringer with 50x50cm wood and 4 layers of biaxial 450g completely on the outside and the transom one layer of plywood one layer of biaxial laminated and that 5 times and now there is a bathing platform glued on top of 18mm plywood laminated all around with 3 layers of tape 15cm 350g biaxial if there are any weak points please answer Erich Resch