Page 4 of 6

Re: CS23

Posted: Tue Sep 15, 2020 12:43 pm
by erich.resch@gmx.at
thank you friends i will do that👍

Re: CS23

Posted: Wed Sep 16, 2020 2:54 pm
by Dan_Smullen
Wow! That is one crisp looking keel!

Re: CS23

Posted: Thu Sep 17, 2020 11:11 am
by erich.resch@gmx.at
thank you👍

Re: CS23

Posted: Sun Sep 20, 2020 1:41 am
by RomanVilgut
erich.resch@gmx.at wrote: Tue Sep 15, 2020 5:09 am Hi
I will use it in Croatia I have now finished laminating the hull everything is straight! 6 hours on Sunday alone that was very hard, wet in wet laminating
Hi Erich! What about the Danube? Btw: Glad to see another Austrian building a boat. I live in Graz and build in Villach. Where are you from?

Here is my build

https://forums.bateau2.com/viewtopic.ph ... 55#p474455

glg

Re: CS23

Posted: Tue Sep 22, 2020 1:52 pm
by erich.resch@gmx.at
Hallo Roman
Ich bin vom Bezirk Bruck Leitha
Ich habe keinen Führerschein für die Donau Außerdem fahre ich gern Fischen in Kroatien auch Spearfischen das ist bei uns sowieso verboten
LG Erich

Re: CS23

Posted: Tue Sep 22, 2020 2:53 pm
by fallguy1000
erich.resch@gmx.at wrote: Tue Sep 22, 2020 1:52 pm Hallo Roman
Ich bin vom Bezirk Bruck Leitha
Ich habe keinen Führerschein für die Donau Außerdem fahre ich gern Fischen in Kroatien auch Spearfischen das ist bei uns sowieso verboten
LG Erich
Wo Fischen Kroatia?

Meine Duetsch is nicht so gut!

Where do you fish in Croatia?

Re: CS23

Posted: Tue Sep 22, 2020 4:38 pm
by RomanVilgut
erich.resch@gmx.at wrote: Tue Sep 22, 2020 1:52 pm Hallo Roman
Ich bin vom Bezirk Bruck Leitha
Ich habe keinen Führerschein für die Donau Außerdem fahre ich gern Fischen in Kroatien auch Spearfischen das ist bei uns sowieso verboten
LG Erich
Verstehe, klingt sehr spannend. Fischen hab ich noch nicht probiert. Ich baue das Boot vor allem zum Cruisen.

Translation:. Sounds thrilling. I did not try fishing yet myself. I am building my boat for cruising

Re: CS23

Posted: Wed Sep 23, 2020 10:48 am
by erich.resch@gmx.at
around the islands sit https://youtu.be/M1YwEg1nsQc

Re: CS23

Posted: Wed Sep 23, 2020 1:47 pm
by fallguy1000
Cool. Thanks for sharing!

Re: CS23

Posted: Fri Aug 13, 2021 8:56 am
by erich.resch@gmx.at
Hello, I have a question for jacques I have lengthened my stringers by 72cm and laminated them inside and made a bracket like in the pictures I laminated the stringer with 50x50cm wood and 4 layers of biaxial 450g completely on the outside and the transom one layer of plywood one layer of biaxial laminated and that 5 times and now there is a bathing platform glued on top of 18mm plywood laminated all around with 3 layers of tape 15cm 350g biaxial if there are any weak points please answer Erich Resch