HB 20 Build

Power Boats only. Please include the boat type in your question.
Johnhb20
Frequent Poster
Frequent Poster
Posts: 28
Joined: Fri Feb 19, 2021 7:46 pm
Location: Kyabram Australia

HB 20 Build

Post by Johnhb20 »

Hi fellow boat builders have just purchased HB 20 house boat plans for my first bigboat build I did build a 16ft canoe last year. Wth our trailer laws over here I have to bring the HB 20 back to 8 ft hoping this can be done. If it can be done would you just leave the middle strip out of the bottom pannels and still use the same size butblock.The bow bottom panels with bow and transom could now be done with one sheet and the bulkheads could be cut six inches each side to bring it back to eight ft. If you could let me know how I have gone here , and what else has to be addressed that would be great .Thanks Johnhb20.

jacquesmm
Site Admin
Site Admin
Posts: 28215
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: HB 20 Build

Post by jacquesmm »

Correct: you can cut a slice out from the middle, everything else stays the same.
Jacques Mertens - Designer
http://boatbuildercentral.com

Johnhb20
Frequent Poster
Frequent Poster
Posts: 28
Joined: Fri Feb 19, 2021 7:46 pm
Location: Kyabram Australia

Re: HB 20 Build

Post by Johnhb20 »

Thanks Jacques I will go with that.

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests