Pin holes/ bubbles

Power Boats only. Please include the boat type in your question.
Edd
Active Poster
Active Poster
Posts: 204
Joined: Wed Oct 11, 2017 11:19 pm
Location: Georgia

Re: Pin holes/ bubbles

Post by Edd »

Thanks for all the advice 👍🏻

Dougster
* Bateau Builder *
* Bateau Builder *
Posts: 3296
Joined: Tue Jun 06, 2006 11:05 pm
Location: Texas

Re: Pin holes/ bubbles

Post by Dougster »

https://www.myrefinishportal.com/us/en/ ... -200g.html

This stuff worked great for me. DaveTX shared it with me a long time ago. He used it on cars. For sure blow out the area well. Thin a dab of this spead super thin. 5 minutes to dry then sand down a minute. Leaves a reddish tint that covers easily enough with the S3 primer. It's really handy to spot fix the odd pinholes you find too late. A dab on your finger, wait the 5, sand it a second, then spot prime with the S3. A little bit goes a long way. It's on my LB22 and no trouble years later.

Dougster

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 9 guests