This morning we loaded up and drove down to Glendo Reservoir to play at the "beach" and test out the NC16. It was a nice sunny day, temp in the upper 70's to low 80's and a gentle breeze blowing through about 10mph. My folks are in town from GA so I have plenty of pictures. My Dad has always been a shutterbug, but since getting a digital it's gotten worse. The upside is I have plenty of pics of anything we do together!
She's an easy carry to the water, but then again I'd hope a simple canoe could be carried a hundred yards by two grown men!
...and she touches water for the first time...
First a test paddle with just me, don't want to put the kids in danger if it's terribly unstable...
Stable and good paddling, not bad for such a simple design...
..and now the kids all get a turn...
With rave reviews from the whole crew I even manage to talk Steph into going out for a paddle.
All in all, I'm quite happy with the finished product as well as the simple, yet effective design.
NC16 July, 2014
- gstanfield
- * Bateau Builder *
- Posts: 4655
- Joined: Sun Jan 10, 2010 5:09 pm
NC16 July, 2014
Previous builds: FL14, NC16, and others...
Current build: FL14 (+10%)
Current build: FL14 (+10%)
-
- * Bateau Builder - Expert *
- Posts: 6724
- Joined: Thu Sep 13, 2007 9:13 pm
- Location: Dade City, Florida
Re: NC16 July, 2014
Congratulations George, nice looking canoe
Richard
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe, FS18 “Bare Bones”, GF12
Currently building...PY12 Kayak
viewtopic.php?f=12&t=62146
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe, FS18 “Bare Bones”, GF12
Currently building...PY12 Kayak
Bare Bones build thread...If there is magic on this planet, it is contained in water. - Loren Eiseley
viewtopic.php?f=12&t=62146
- gstanfield
- * Bateau Builder *
- Posts: 4655
- Joined: Sun Jan 10, 2010 5:09 pm
Re: NC16 July, 2014
Thanks Richard
Previous builds: FL14, NC16, and others...
Current build: FL14 (+10%)
Current build: FL14 (+10%)
Re: NC16 July, 2014
Nice boat, nice paint job.
Jacques Mertens - Designer
http://boatbuildercentral.com
http://boatbuildercentral.com
Re: NC16 July, 2014
Nice, I like the paint job to, I came real close to doing that on my GF16.
Gary
GF-16 Completed
GF-16 Completed
-
- Frequent Poster
- Posts: 47
- Joined: Sun Mar 28, 2010 11:49 am
- Location: West Palm Beach, FL
- Location: West Palm Beach, FL
Re: NC16 July, 2014
Congratulations, nice build!!
- tech_support
- Very Active Poster
- Posts: 12318
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Vero Beach, FL
- Contact:
- gstanfield
- * Bateau Builder *
- Posts: 4655
- Joined: Sun Jan 10, 2010 5:09 pm
Re: NC16 July, 2014
Thanks for the kind words everyone. The kids absolutely loved the boat and have been asking every day to go back out on it. Now to finish the other three partially built boats littering my shop....
Previous builds: FL14, NC16, and others...
Current build: FL14 (+10%)
Current build: FL14 (+10%)
Who is online
Users browsing this forum: No registered users and 4 guests