Page 1 of 1
Lm18 paint topside and hull
Posted: Sun Apr 18, 2021 9:26 pm
by Edd
I’m in the process of building a lm18. If my boat will stay on a trailer vs in a boat slip, can I leave off the bottom paint? The plan was to use interlux or alexseal on the hull and topside, but I’m second guessing if that’s acceptable.
Re: Lm18 paint topside and hull
Posted: Sun Apr 18, 2021 9:51 pm
by Fuzz
If it were mine I would not even think of putting bottom paint on it.
Re: Lm18 paint topside and hull
Posted: Sun Apr 18, 2021 11:33 pm
by Edd
Fuzz wrote: ↑Sun Apr 18, 2021 9:51 pm
If it were mine I would not even think of putting bottom paint on it.
Yeah I don’t want to. Don’t like messing with graphite either.
I should be fine I guess since it’ll never be sitting in the water for days.
Re: Lm18 paint topside and hull
Posted: Tue Apr 20, 2021 9:12 pm
by TomW1
If you use a good 2 part top side paint you will be fine. It has been proven be several guys on here that even 2-3 days in the water will be fine, with a top of the line paint.
Tom
Re: Lm18 paint topside and hull
Posted: Wed Apr 21, 2021 2:50 pm
by Reid
A good 2-part Polyurethane Topcoat is what I would recommend. No need to use bottom paint on a boat that will only be in the water for few days at most.
-Reid
Re: Lm18 paint topside and hull
Posted: Sat May 01, 2021 10:35 pm
by Edd
Thanks guys