Recipes...
Posted: Sun Mar 07, 2010 7:04 pm
After reading Tex 2009's cooking thread I figured we may need a recipe thread. I have seen people post some recipes here and there around the board. I know I enjoy cooking new things not sure about everybody else.
Heres what I am working on right now. Not food but beer.
Stone Ruination IPA clone.
5 Gallon yield, malt extract recipe
Ingredients:
2 cans Alexander's Pale Malt Extract (4 lbs. each)
2 lbs. Light DME
1 lb. Belgian Clear Candi Sugar
½ lb. Caramel Malt 10L, milled (for steeping)
2 oz. Magnum hops for bittering (AA= 11%) … boil 60 minutes
1 oz. Centennial hops for flavor … whirlpool addition (add at the end of the boil)
2 oz Centennial hop pellets for dry-hopping
½ Tbs. Irish Moss, reconstituted
California Ale Yeast (White Labs # WLP001) or your favorite ale yeast
Instructions:
Begin at least 24 hours in advance by making a pint starter with the California Ale yeast using one cup of the DME. Set aside another 1-¼ cups of DME for priming at bottling time. Put 3 gallons of water up to heat. Put the Caramel Malt a muslin bag, and when the water reaches 160 degrees turn off heat and steep for 10 minutes. Discard the grain bag and turn the heat back on. When the water comes to a boil, turn off the heat and stir in the sugars (malt extract, DME, candi sugar) until completely dissolved. Turn heat back on. When the wort comes to a boil, set a timer for 60 minutes and add the bittering hops. When there are 15 minutes remaining on the timer add the reconstituted Irish Moss. At the end of the 60 minute boil, turn off the heat and add the “whirlpool” hops. Cool the wort to 80 degrees Fahrenheit or less and top up the fermenter with water to five and a quarter gallons total. Aerate well and ferment at 72 degrees Fahrenheit for one week, then rack to a secondary fermenter. Add the Centennial “dryhops” and allow to ferment for one more week before siphoning to the bottling bucket. Dissolve the remaining one and a quarter cups of DME in boiling water, cool it down and stir it into the bottling bucket immediately before bottling. Allow two weeks at room temperature for conditioning in the bottle before chilling down the beer.
Target O.G. = 1.069
Target F.G. = 1.010
ABV = approximately 7.7%
Very hoppy beer.
Matt
Heres what I am working on right now. Not food but beer.
Stone Ruination IPA clone.
5 Gallon yield, malt extract recipe
Ingredients:
2 cans Alexander's Pale Malt Extract (4 lbs. each)
2 lbs. Light DME
1 lb. Belgian Clear Candi Sugar
½ lb. Caramel Malt 10L, milled (for steeping)
2 oz. Magnum hops for bittering (AA= 11%) … boil 60 minutes
1 oz. Centennial hops for flavor … whirlpool addition (add at the end of the boil)
2 oz Centennial hop pellets for dry-hopping
½ Tbs. Irish Moss, reconstituted
California Ale Yeast (White Labs # WLP001) or your favorite ale yeast
Instructions:
Begin at least 24 hours in advance by making a pint starter with the California Ale yeast using one cup of the DME. Set aside another 1-¼ cups of DME for priming at bottling time. Put 3 gallons of water up to heat. Put the Caramel Malt a muslin bag, and when the water reaches 160 degrees turn off heat and steep for 10 minutes. Discard the grain bag and turn the heat back on. When the water comes to a boil, turn off the heat and stir in the sugars (malt extract, DME, candi sugar) until completely dissolved. Turn heat back on. When the wort comes to a boil, set a timer for 60 minutes and add the bittering hops. When there are 15 minutes remaining on the timer add the reconstituted Irish Moss. At the end of the 60 minute boil, turn off the heat and add the “whirlpool” hops. Cool the wort to 80 degrees Fahrenheit or less and top up the fermenter with water to five and a quarter gallons total. Aerate well and ferment at 72 degrees Fahrenheit for one week, then rack to a secondary fermenter. Add the Centennial “dryhops” and allow to ferment for one more week before siphoning to the bottling bucket. Dissolve the remaining one and a quarter cups of DME in boiling water, cool it down and stir it into the bottling bucket immediately before bottling. Allow two weeks at room temperature for conditioning in the bottle before chilling down the beer.
Target O.G. = 1.069
Target F.G. = 1.010
ABV = approximately 7.7%
Very hoppy beer.
Matt
With the rain were having I should have built a ARK