Core Materials for Sale (Coosa and Nida)

Share tips, suggest or request changes, anything that does not fit in the other categories.
LilRichard
Frequent Poster
Frequent Poster
Posts: 23
Joined: Tue Jul 14, 2009 11:12 pm

Core Materials for Sale (Coosa and Nida)

Post by LilRichard »

My project is on indefinite hold, if not possibly scrapped. Work has accelerated at an untenable pace, leaving no time for a rebuild of this magnitude. I pre-bought a large portion materials needed, including the core material listed below. I am located in Tampa, FL and will drive a reasonable distance for a sale. My willingness to travel increases with the quantity being sold.

For those who do knot know Kay-Cell, it is a direct competitor to Coosa and has nearly identical properties, just slightly less cost. FGCI has been selling it for over a decade. Kayco’s website for the product is here: http://www.kayco-composites.com/kc_kaycel.html

I have:
Ten sheets of ½” Kay-Cell in 25lb density. FGCI sells for $345 a sheet. My ask is $300 per sheet. If you buy all of it, the price is $275 a sheet. Link to product on FGCI’s site: https://www.fgci.com/item/135209/Fiberg ... -x-48-x-96

Three sheets of 1” Kay-Cell in 25lb density. FGCI sells for $466 a sheet. My ask is $400 per sheet. If you buy all of it, the price is $370 a sheet. Link to product on FGCI’s site: https://www.fgci.com/item/136213/Fiberg ... -x-48-x-96

Four sheets of 1” Nidacore in 5lb density. FGCI sells for $93 a sheet. My ask is $80 per sheet. If you buy all of it, the price is $70 a sheet. Link to product on FGCI’s site: https://www.fgci.com/item/137486/Honeyc ... lb-Density

Two sheets of scrimmed / scored 1” Nidacore in 5lb density. FGCI does not list a price, but I am almost certain they sell for the same price of $93 a sheet. My ask is $80 per sheet. If you buy all of it, the price is $70 a sheet. One row of scrim at the top has some blocks missing.

Four sheets of 3/4” Nidacore in 5lb density. FGCI sells for $72 a sheet. My ask is $60 per sheet. If you buy all of it, the price is $50 a sheet. Link to product on FGCI’s site: https://www.fgci.com/item/137484/Honeyc ... lb-Density

Should someone want all, or nearly all of the material listed above, I will provide a further discount. Please contact me should you be interested. Call or text: eightonethree-7six0-one79six.

Image


Image


Image


Image

TomW1
Very Active Poster
Very Active Poster
Posts: 5844
Joined: Sun Apr 19, 2015 10:57 pm
Location: Bryson City, NC

Re: Core Materials for Sale (Coosa and Nida)

Post by TomW1 »

Ah lilRicharad I hate to see any one five up on there project. You have week ends and holidays when you can work on it. If you need the money that is another matter. so go ahead and sell it. Your extra work won't last for ever and you will wish you had not sold it. Been there done that.

Tom
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses. LT US Navy 1970-1978

LilRichard
Frequent Poster
Frequent Poster
Posts: 23
Joined: Tue Jul 14, 2009 11:12 pm

Re: Core Materials for Sale (Coosa and Nida)

Post by LilRichard »

Tom: I appreciate the words of encouragement, truly. I have done rebuilds in the past, and derive immense pleasure from them. This time my career is in a different place, such that last year I got three days off. Yes, that will slow at some point, but no reason to sit on materials until such time arrives.

Thank you again though, I do appreciate the sentiment.

LilRichard
Frequent Poster
Frequent Poster
Posts: 23
Joined: Tue Jul 14, 2009 11:12 pm

Re: Core Materials for Sale (Coosa and Nida)

Post by LilRichard »

All sold, TY.

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests