FS 14 limber holes

[donk]

Before I reinstall my frames I realize that limber holes should be drilled, filled and redrilled.

I am considering installing a partial sole like Muscrat100 did, from stringer to above the chine.

I want the middle seat dry so a channel needs to be built. Can I use half of a 2" PVC pipe? What is required? Rough up the pipe, fillet in place and glass over it? Is 2" big enough? That will allow for about a 3/4" hole.

don

[jacquesmm]

1/2 pipe 2" diameter fiberglassed all over.

[muscrat100]

Don,
I see you live in Gloucester. If you want a close look at my skiff, I am at gwynns island most weekends and can bring it with me- I live in richmond.. email me at

muscrat at yahoo dot com


Steve