And the temperature was not too bad in the shop
Best I can do to defend us Narfi
Sintes 21 Rebuild
-
Fuzz
- * Bateau Builder - Expert *
- Posts: 9150
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Sintes 21 Rebuild
Well the weather improved today
And the temperature was not too bad in the shop
Best I can do to defend us Narfi
And the temperature was not too bad in the shop
Best I can do to defend us Narfi
-
Fuzz
- * Bateau Builder - Expert *
- Posts: 9150
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Sintes 21 Rebuild
I don't know what it says for the builder but this thing is a real bear to take apart 
Cutting out a 1/4 inch of glass is about as easy as it has been 
Cutting out a 1/4 inch of glass is about as easy as it has been 
Re: Sintes 21 Rebuild
Fuzz, nice warm shop!! A a beautiful picture of the area!!! Jeff
Re: Sintes 21 Rebuild
I don't think I've ever seen a thermometer that went down to -60!! I guess there's not much need for them around these parts.
Good luck on dismantling that tank.
Good luck on dismantling that tank.
Hank
-
Fuzz
- * Bateau Builder - Expert *
- Posts: 9150
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Sintes 21 Rebuild
It is really tough when you see one pegged out. Makes the old nose hairs crackle
I finally said enough of the messing around and broke out the 7 1/4 skill saw and some carbide blades. Makes a mess but it will cut some glass. I have seen 40 foot hulls cut in half in no time using a circular saw and carbide blades
-
cape man
- * Bateau Builder - Expert *
- Posts: 8525
- Joined: Sun Jan 20, 2008 12:02 pm
- Location: Lithia, Florida
Re: Sintes 21 Rebuild
We have a minus 80 C freezer at work for samples.
What are you cutting now?
What are you cutting now?
The world always seems brighter when you've just made something that wasn't there before - Neil Gaiman
-
Fuzz
- * Bateau Builder - Expert *
- Posts: 9150
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Sintes 21 Rebuild
A little earlier I removed the glass from to gunnels running down the inside on one side. Still need to do the same on the other side. And I am pretty sure the deck is all coming out while I am at it. No epoxy for a few days so I might as well go ahead and tear something up
Maybe next time I am down your way I can bring my saw and WMD so I can help you do a little finish work
Maybe next time I am down your way I can bring my saw and WMD so I can help you do a little finish work
-
Fuzz
- * Bateau Builder - Expert *
- Posts: 9150
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Sintes 21 Rebuild
No rest for the weary around here. I ordered more epoxy on Wednesday the 8th. Today I go check the mail and low and behold I have my order. 5 days and 2 of them were weekend days. Pretty darn good service I would say. Looks like it will be back to the transom in the morning.
Re: Sintes 21 Rebuild
Fuzz, yes, I must admit, USPS is not a bad service!! Glad it got there that quick!! Send me photos!! Jeff
Who is online
Users browsing this forum: No registered users and 13 guests