Jaysen's V12 -- 'Lil Bit' of everything fun
-
- * Bateau Builder - Expert *
- Posts: 8939
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
You have come so far this little set back is no big deal. I have total faith you will resolve it and have fun sailing soon.
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
Definitely looks like too much space. I think glossieblack's suggestion, or the PVC, or maybe wrapping the mast would be the best options. From the plans, the hole in the mast partner looks narrower than the step, and the step looks like it has about the same gap as in your photo. I'll ask Jacques to take a look at the thread here. Maybe he can weigh in when he gets to the next wi-fi spot.
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
Now that I look at that drawing again, (I tried to do a quote with the image, but it didn't work) it seems to be saying 3" to center of hole from edge of seat, not 3" diameter . . .
Hank
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
Now that you point that out...
Hmm... I'm going to start with the bushing idea tonight. The "rebuild" will need to be over the winter.
Hmm... I'm going to start with the bushing idea tonight. The "rebuild" will need to be over the winter.
-
- * Bateau Builder - Expert *
- Posts: 8939
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
Do that, go play, make it right this winter
So have you started the paper work goat rope yet?
So have you started the paper work goat rope yet?
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
Jaysen, I asked Jamie to send you a PM in response to your question to me earlier today. I hope he was able to help and I know Jamie also sent an email to Jacques!! We have not heard from him (Jacques) in more than 10 days now and he should re-surface soon!! Jeff
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
no...called to verify photos... have to show fully rigged. That's the plan for tonight. Which will require moving the boat. Just might accidentally move her down the launch ramp. Oops!
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
I think I have the answer I need. Answers which basically say "LEARN TO READ A PLAN YOU MORON!"Jeff wrote: ↑Mon Jun 12, 2017 3:36 pm Jaysen, I asked Jamie to send you a PM in response to your question to me earlier today. I hope he was able to help and I know Jamie also sent an email to Jacques!! We have not heard from him (Jacques) in more than 10 days now and he should re-surface soon!! Jeff
Perfectly acceptable answer
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
That is not an answer I would send you!!! Jeff
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Jaysen's V12 -- 'Lil Bit' of everything fun
My wife may have been involved with reading the responses
Who is online
Users browsing this forum: Ahrefs [Bot] and 2 guests