Today has gone as planned other than a few interruptions from salesmen. I pulled fillets on the strakes, put a second coat on the side/transom corner and washed the lower side panel and started filling it. After I used 90 grams of Quick Fair I emptied that container and opened a new bucket. I have to say that first kit went a lot further than I thought it would!
Today's report.
1. Side panel to transom. Filled and Sanded,second coat applied.
XXX 2. Fillet the strakes. Completed XXX
3. Fair the last side panel. Started, finish filling tomorrow!
4. Fair the transom again.
5. Mount castors
6. Wash and prep for primer
Fillets:
Started last side panel.
Tomorrow morning sand fillets while it's cool. The shop hit 86 degrees around 3:30 today and the rest of the week is supposed to be even hotter.
Then continue to fill the side.
Eric's C21
-
- * Bateau Builder - Expert *
- Posts: 6725
- Joined: Thu Sep 13, 2007 9:13 pm
- Location: Dade City, Florida
Re: Eric's C21
Looks great! Very nice looking fillets.
Richard
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe, FS18 “Bare Bones”, GF12
Currently building...PY12 Kayak
viewtopic.php?f=12&t=62146
Completed boats...XF20 "Red Alert", Aripeka Angler's Strip Canoe, FS18 “Bare Bones”, GF12
Currently building...PY12 Kayak
Bare Bones build thread...If there is magic on this planet, it is contained in water. - Loren Eiseley
viewtopic.php?f=12&t=62146
Re: Eric's C21
Thank You Richard.
Re: Eric's C21
Not a great day of boat building. I've felt like mud all day, just no energy. I managed to sand the fillets on the strakes.\
I found an air pocket in the process. It's been repaired but that it. I'm going home to rest.
Today.
1. Side panel to transom. Filled and Sanded,second coat applied.
2. Fair the last side panel. Continue tomorrow
3. Fair the transom again.
4. Mount castors
5. Wash and prep for primer
Fillets
I found an air pocket in the process. It's been repaired but that it. I'm going home to rest.
Today.
1. Side panel to transom. Filled and Sanded,second coat applied.
2. Fair the last side panel. Continue tomorrow
3. Fair the transom again.
4. Mount castors
5. Wash and prep for primer
Fillets
Re: Eric's C21
I hope you feel better tomorrow!! Boat is looking good regardless!! Jeff
Re: Eric's C21
I'm try to get some work done but I had spend the morning at the doctors office.
I may have an ulcer, going for ultra sound tomorrow. Doc said it could be liver or gall bladder also.
I've spent the last five day days feeling like I've been kicked in the stomach.
I have most of the last side panel filled. I have a little bit left to go. Saving it for first light before ultra sound.
I may have an ulcer, going for ultra sound tomorrow. Doc said it could be liver or gall bladder also.
I've spent the last five day days feeling like I've been kicked in the stomach.
I have most of the last side panel filled. I have a little bit left to go. Saving it for first light before ultra sound.
- cape man
- * Bateau Builder - Expert *
- Posts: 8282
- Joined: Sun Jan 20, 2008 12:02 pm
- Location: Lithia, Florida
Re: Eric's C21
Good luck at the Doc!
The world always seems brighter when you've just made something that wasn't there before - Neil Gaiman
Re: Eric's C21
Eric, take care of yourself as an ulcer can be ugly and painful for a while!! Jeff
-
- * Bateau Builder - Expert *
- Posts: 8939
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Eric's C21
Reading your symptoms and the tests needed my thought was sounds a little bit preggers to me
Hope the Docs get you fixed up. I am really enjoying your build.
Hope the Docs get you fixed up. I am really enjoying your build.
Who is online
Users browsing this forum: No registered users and 13 guests