Eric's C21
Re: Eric's C21
Awesome! can't wait to see what the primer reveals (mirror finish most like)
Re: Eric's C21
I'm gonna try my best not to be to critical. I'm getting tired.
Nope, I've seen the builds. I doubt I'll make anyone look bad.
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Eric's C21
Unless you literally start shooting your hull with bird shot, Lil Bit's work boat finish will be far far below your finish.
Re: Eric's C21
Alright I'm ready for Monday! Castors are mounted and I can push her around with my finger tips!
I have a bad case of glass itch. Amazing how much sanding dust gets under the boat.
I have a bad case of glass itch. Amazing how much sanding dust gets under the boat.
-
- * Bateau Builder - Expert *
- Posts: 8938
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Eric's C21
You made me feel bad looking at how clean your work area is. I went out and spent 2 hours with the shop vac cleaning my shop. I know it had to have done some good but another 48 hours would not hurt
Say what you want but I am not buying you will slack off on the finish work at this point. You spent way too much time doing the fairing for that to happen.
Say what you want but I am not buying you will slack off on the finish work at this point. You spent way too much time doing the fairing for that to happen.
- glossieblack
- * Bateau Builder *
- Posts: 4107
- Joined: Wed Jan 02, 2013 1:28 pm
- Location: Australia
Re: Eric's C21
Enjoy priming her Eric. You're about to be rewarded for making her fair.
Currently building Jacques Mertens ST21 "Skinnydip". Boating adventures: Splash testing and using 'Skinnydip, as a basis of further building refinement; Adams 44’ sailing sloop "Great Sandy" (cruising and maintaining); Iain Oughtred Feather Pram "Mini Dip" (building); Jacques Mertens R13 "Wood Duck" (built and due for maintenance).
Re: Eric's C21
Congratulations you did a good job. keep it up.
- AmbitiousRookie
- Frequent Poster
- Posts: 93
- Joined: Thu Apr 10, 2008 8:12 pm
- Location: NE Indiana
- Location: INDIANA
Re: Eric's C21
Great job and I'm with Fuzz no way you'll slack off now lol if you like me it would bug you till you fix it anyway. Fuzz are we sure he is the one that cleaned it up (poke poke) hey since you have a long cycle time can you clean this up for me real quick
Re: Eric's C21
LOL It was me, The crew is off on fridays. Just management and QC work fridays.AmbitiousRookie wrote: ↑Sat Jun 24, 2017 5:23 pm Great job and I'm with Fuzz no way you'll slack off now lol if you like me it would bug you till you fix it anyway. Fuzz are we sure he is the one that cleaned it up (poke poke) hey since you have a long cycle time can you clean this up for me real quick
Re: Eric's C21
Field Day. Getting the work area cleaned up so I can prime and paint. Don't know when I can get the primer on though. Both of my girls start driving school tomorrow so I have to be limo driver.
Picture for Fuzz.
Picture for Fuzz.
Who is online
Users browsing this forum: No registered users and 12 guests