Okay, that makes sense. Stiffeners then to reduce side flex.
My cx 25
Re: My cx 25
Eric (aka, piperdown)
"Give an Irishman lager for a month and he's a dead man. An Irishman's stomach is lined with copper, and the beer corrodes it. But whiskey polishes the copper and is the saving of him." --> Mark Twain
"Give an Irishman lager for a month and he's a dead man. An Irishman's stomach is lined with copper, and the beer corrodes it. But whiskey polishes the copper and is the saving of him." --> Mark Twain
Re: My cx 25
I think so. this and what the project says
15. Topside longitudinal stiffener is required from frame E transom.
Typically made of 13 of a 51Ø PVC pipe fiberglassed with 1 layer biaxial tape or 2 layers 102mm woven. Stiffeners fits between frames
Re: My cx 25
That's seems to be a good way to do it. Build on!
Eric (aka, piperdown)
"Give an Irishman lager for a month and he's a dead man. An Irishman's stomach is lined with copper, and the beer corrodes it. But whiskey polishes the copper and is the saving of him." --> Mark Twain
"Give an Irishman lager for a month and he's a dead man. An Irishman's stomach is lined with copper, and the beer corrodes it. But whiskey polishes the copper and is the saving of him." --> Mark Twain
Re: My cx 25
finally they arrived
Re: My cx 25
Very nice clean work!! Jeff
-
- * Bateau Builder - Expert *
- Posts: 8921
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: My cx 25
Like Jeff said, really nice looking work.
Who is online
Users browsing this forum: Yandex [Bot] and 14 guests