Looks like you got it. Slick work, bud!FluidDynamic wrote: ↑Fri Jan 17, 2020 10:29 pm I know it looks the same in the pics, but I think I got most of the lent out this time. I'm happy with it. Moving on to the sides.
Panga 20 Build
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: Panga 20 Build
Re: Panga 20 Build
Really well done FluidDynamic!! She is going to be a beautiful Panga!! Jeff
-
- * Bateau Builder *
- Posts: 449
- Joined: Sun Dec 30, 2018 9:09 pm
- Location: Spanish Fort, AL
Re: Panga 20 Build
Waiting on warmer weather to finish painting the transom and sides. Too cold this week.
-
- * Bateau Builder *
- Posts: 449
- Joined: Sun Dec 30, 2018 9:09 pm
- Location: Spanish Fort, AL
Re: Panga 20 Build
Are a few pinholes in the final finish okay?
-
- * Bateau Builder - Expert *
- Posts: 10198
- Joined: Tue Jan 12, 2010 12:25 am
Re: Panga 20 Build
Sure hope so..I got a couple. I have been told the paint will blister..
-
- * Bateau Builder *
- Posts: 449
- Joined: Sun Dec 30, 2018 9:09 pm
- Location: Spanish Fort, AL
Re: Panga 20 Build
Painting is done. May have to put some kinda pin stripe to cover the line between the two different colors. It's not perfect. Anyway, next step is to build some kind of flipping jig on the hull then flip it this week sometime. It's going to be wierd walking g out in my garage with a boat flipped. It's been a year. If anyone's wondering, the rub rails will be painted later after I wrap fiberglass over the gunnel cap.
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: Panga 20 Build
Well done!
She looks great upside down, but right side up will be good to see too!
She looks great upside down, but right side up will be good to see too!
-
- * Bateau Builder *
- Posts: 275
- Joined: Fri Aug 31, 2018 8:03 pm
- Location: Kissimmee FL.
Re: Panga 20 Build
WOW Great job.
-
- * Bateau Builder - Expert *
- Posts: 8920
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Panga 20 Build
That is going to be one pretty Panga
-
- * Bateau Builder *
- Posts: 449
- Joined: Sun Dec 30, 2018 9:09 pm
- Location: Spanish Fort, AL
Re: Panga 20 Build
I started building a cradle for flipping. I hope this will be sufficient. I plan on putting the cradles on each frame. Build a level frame around the cradles. Then put the cradle on the floor next to the jig, flip the boat, then put it on the cradles. Next, I will cut all of the frames off of the jig, then set the boat sitting on the cradles back on the strong backs.
Who is online
Users browsing this forum: No registered users and 8 guests