Nola OD18

[Salty F17]

Black drum that big are full of worms here. Same there?

Sometimes I only had one with worms though

[Salty F17]

Man it was cold this mornings 45 degrees but Got one side glassed in and ran out of epoxy glad Im i didn't start the other side o well steady chipping at the progress Is all that matters its now sanded ready for the other side also will be doing the upper panels with 6oz woven

[Jeff]

Nice progress Salty!!! Cold here too this AM!!! 45 is cold for Florida!!! Jeff

[Salty F17]

Finally completed glassing the entire outside start to attach skeg and fairing tomorrow

[Jeff]

Salty, nice work!! How is your other boat doing? Getting any fishing in these days?? Jeff

[Jeff]

Salty, nice work!! How is your other boat doing? Getting any fishing in these days?? Jeff

[TomW1]

Salty, nice work!! How is your other boat doing? Getting any fishing in these days?? Jeff

Jeff go back a page or so he had some nice grouper.

[Salty F17]

Salty, nice work!! How is your other boat doing? Getting any fishing in these days?? Jeff

Jeff go back a page or so he had some nice grouper.

TomW1 they were black drum

[cape_fisherman]

One word about the skeg...I see alot of folks installing their skegs & strakes at the beginning of their builds. It's actually easier to do it after fairing the bottom...well...I should say that it's easier to fair the bottom before adding the bottom hardware. Get the bottom faired, lay out where your skeg goes, sand that area back to glass, attach, and then just fair & blend in. That's the way it's done where I'm from. Just a different idea.

[TomW1]

Salty, nice work!! How is your other boat doing? Getting any fishing in these days?? Jeff

Jeff go back a page or so he had some nice grouper.

TomW1 they were black drum

Sorry, nice fish any way. YUM